HFD3081-108

F i n i s a r Product Specification SW Detector 2Gbps, PIN+Pre-amp, TO-46 HFD3081-108 PRODUCT FEATURES Low electrical parasitic TO-46 package High performance GaAs PIN photodiode with separate transimpedance amplifier Low electrical parasitic TO46 package Data rates from 155Mbps to 2.5Gbps Low bias currents and voltages The HFD3081-108 use a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 2.5Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols PRODUCT SELECTION Part Number Description HFD3081-108 Detector, 4 pin TO-46, rated for 1G and 2G applications Confidential and Proprietary 2012 Finisar Corporation. All rights reserved Rev. A1 Page 1 HFD3081-108 Product Specification April 2013 F i n i s a r I. Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to +85C Case Operating Temperature -40* to +85C Lead Solder Temperature 260C, 10 sec. Power Supply Voltage -0.5V to 4V Incident Optical Power +3 dBm average, +6 dBm peak 1 ESD Exposure (Human Body Model) 225V Notice Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Confidential and Proprietary 2012 Finisar Corporation. All rights reserved Rev. A1 Page 2