HFD6380-418

F i n i s a r Product Specification 10 Gbps 850nm PIN + Preamp SC ROSA Package HFD6380-418 PRODUCT FEATURES power monitoring High gain, inverting Low power dissipation LC ROSA package Can drive SERDES directly SC ROSA package. Flex circuit interface fits all High performance GaAs PIN 10GB MSAs photodiode with separate RoHS compliant (EU Directive on transimpedance amplifier Restrictions of Hazardous Substances, 2002/95/EC) Low electrical parasitic TO46 package Data rates up to 10.7Gbps Separate detector bias pin can be used for receive The HFD6380-418 uses a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for 10Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols. The optical assembly is designed to interface either 50mm or 62.5mm multi-mode fiber. The HFD6380-418 is designed to be paired with Advanced Optical Components HFE6392 VCSEL 10Gbps TOSA products (see data sheets for HFE6392 products at www.finisar.com/). PRODUCT SELECTION Part Number Description HFD6380-418 SC ROSA, with flex. High gain, inverting. Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B00 Page 1 HFD6380-418 Product Specification Oct 2014 F i n i s a r I. Absolute Maximum Ratings Parameter Rating Storage Temperature -40 to +95C Case Operating Temperature -20 to +95C Lead Solder Temperature 260C, 10 sec. Power Supply Voltage -0.3V to 3.6V PIN Voltage 10V Incident Optical Power 0 dBm average,+4 dBm peak ESD Exposure (Human Body Model) 225V Notice Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. Notice The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product Confidential and Proprietary 2014 Finisar Corporation. All rights reserved Rev. B00 Page 2