Technical 102 Series Fischer Connectors SA Saint-Prex, Switzerland Multipole Low Voltage Specifications Phone +41 21 800 95 95 Fax +41 21 800 39 24 www.fischerconnectors.com mail fischerconnectors.ch Product range covered: S / SC / SA / SV / SOV / SS / SSC / WSO / SF / SFE / SFU / SFPE / SFPU / D / DB / DBP / DBPC / DG / DGP DEE / DEU / DBEE / DBEU / DBPE / DBPU / DBPLE / DBPLU / K / KE / KS / KSE / DKBE / WDE Product Benefits Up to a maximum of 9 contacts Unsealed (IP50), waterproof (IP68) or hermetically sealed 3 keying-codes Reverse contact variants Standard matt silver chrome or non-reflective matt black chrome finish Full range of accessories including bend reliefs and sealing caps available Scoop-proof (IEC 60512-1-4) Representative image of standard S and D bodies Pages Environmental & Mechanical Data........................... 2 Material & Surface Treatments ................................ 2 Electrical Data.......................................................... 2 Contact Configurations ............................................ 3 Tooling ..................................................................... 4 Information provided herein is believed to be accurate at time of publishing. Fischer Connectors reserves the right to make modifica- tions on products for continuous improvement without prior notice. Fischer Connectors SA / All rights reserved This document is the proprietary of Fischer Connectors SA. All communications to third parties or the reproduction in any form, even partial, are prohibited without our written consent. Document No. 600.00.454 Rev : 2.3 Date : 03 Oct. 12 Established by : SKE Approved by : SRH Page 1 of 4 102 Series Multipole Low Voltage Environmental & Mechanical Data Characteristic Product Type Value Standard Unsealed Connectors (mated) IP50 Sealing Performance Plugs with IP68: 2 m submersion for 24 hours (mated) IEC 60529 General Purpose Sealed Clamps IP69K (2) (1) Receptacles U Body Style IP68: 2 m submersion for 24 hours -8 Hermetic: Tested: < 10 mbar l/sec. IEC 60068-2-17 Test Qk, Receptacles E Body Style IP69K (2) Method 3 Unsealed Connectors -65C to +200C Operating Temperature Range Plugs Using -65C to +130C General Purpose Sealed Clamps IEC 60512-6-11 i+j IEC 60068-2-14-Nb Receptacles U Body Style -50C to +200C (3) Receptacles E Body Style (3) -50C to +150C IEC 60068-2-11 Test Ka Salt mist, 96 hours, 5% salt solution, 35C Corrosion Resistance MIL-STD-202 Method 101 Condition A IEC 60512-5-9a Endurance 10000 mating cycles EIA-364-09 10 to 2000 Hz, 1.5 mm or 15 g, 12 sweep cycles MIL-STD-202 Method 204 Vibration per axis, 20 minutes per 10-2000-10 Hz sweep Condition B cycle, no discontinuity > 1 us 7 9 Unsealed Connectors PEEK: 10 Gy (=10 Rads) Radiation Resistance (4) 5 7 Sealed Receptacles Viton O-rings: 10 Gy (=10 Rads) (1) The sealing performance can be affected by the long term quality of the cable. (2) Dust tight, protected against the effects of high-pressure liquids. The test requirements for IP69K exist only in DIN 40050-9, the German version of IEC 60529. Operating temperature of Viton O-ring: -20C to +200C. Min mating temperature of 0C. (3) With Viton O-ring (standard) in receptacle interface: With EPDM O-ring (Low temp) on request in receptacle interface: Operating temperature of EPDM O-ring: -50C to +160C. Min mating temperature of -20C. (4) For information only. Not tested by Fischer Connectors. Material & Surface Treatments Finish Material Metal Parts Designation ISO Standard Designation Standard CW614N Chrome SAE-AMS 2460 Body Shell Brass CuZn39Pb3 UNS C 38500 over Nickel Cable Clamps, Nuts CW614N SAE-AMS-QQ-N-290 Brass CuZn39Pb3 Nickel UNS C 38500 SAE-AMS 2404 and other Inner Parts Contacts CW614N - Male (solder) Brass CuZn39Pb3 1 m Gold UNS C 38500 MIL-DTL-45204D Type I over Nickel ASTM B488 CW456K - Female, - Male (crimp) Bronze CuSn4Zn4Pb4 ASTM B 139, UNS C 54400 Insulator and Sealing International Symbol Flammability Standard PEEK UL 94 V-0 MIL-P-46183 Insulator Interface O-rings Viton UL 94 V-0 ~SAE-AMS 7276 EPDM UL 94 HB (Receptacles) Sealant Material Silicon compound UL 94 V-0 - IP68 - Hermetic Epoxy compound UL 94 HB (Receptacles) Cable Sealing - IP68 TPE-S UL 94 HB (Plugs) Our products are RoHS compliant and conform with the EC Directive 2002/95/EC Electrical Data Characteristic Contact Size Typical Values Standard 0.5 mm 5 m Contact Resistance IEC 60512-2-1-2a 0.7 mm 5 m IEC 60512-2-2-2b over 10000 Mating Cycles 0.9 mm 4 m 45 m IEC 60512-2-6-2f Shell Resistance 10 > 10 IEC 60512-3-1-3a, Method C Insulation Resistance > 60 dB up to 1GHz IEC 60512-23-3 Shielding Effectiveness Document No. 600.00.454 Rev : 2.3 Page 2 of 4