Ericsson Internal Limited Internal
E
TABLE OF CONTEPRODUCT SPECIFICATION NTS 1 (1)1 (3)
PrPreparepareedd ( (aallsso so subjubjecectt r reesponsisponsibbllee i iff othotheerr)) NNoo. .
HenMPM/BY/P Hrik Sundhenri (MPM/BY/P) k Sundh 1/1301 BM00152-EN/LZR 646 8 Uen T146327
Technical Speci cation
ApprApprovoved Ced Checked hecked DDate ate RReevv RRefereferencence e
EN/LZT 146 327 R1B April 2006
PMJ 8000 series
MPM/BY/M [Krister Lundberg] 20062006-4-4-10 -10 B B
Ericsson Power Modules AB
POL regulator, Input 10.8-13.2 V, Output 26 A/143 W
Key Features
30A output current
10.8-13.2V input voltage range
Output voltages from 0.8V up to 5.5V
Industry standard POLA compatible
34.8 x 28.5 x 9.00 mm (1.37 x 1.12 x 0.354 in.)
High efficiency, up to. 94.5%
Auto Track sequencing pin
More than 2.0 million hours MTBF
General Characteristics
Operating temperature: -40C to 85C
Input under voltage protection
Start up into a pre-biased output safe
Output short-circuit protection
Over temperature protection
On/Off inhibit control
Safety Approvals Design for Environment
Margin up/down control
Output voltage sense
Wide output voltage adjust function
Highly automated manufacturing ensures quality
Meets requirements in high-
ISO 9001/14001 certified supplier
temperature lead-free soldering
processes.
Contents
General Information .............................................................2
Safety Specification .............................................................3
Absolute Maximum Ratings .............................................................4
Product Program Ordering No.
0.8-1.8 V/26 A PMJ 8418T ............................................
0.8 V/26 A Electrical Specification .............................................................5
1.0 V/26 A Electrical Specification .............................................................8
1.2 V/26 A Electrical Specification ...........................................................11
1.5 V/26 A Electrical Specification ...........................................................14
1.8 V/26 A Electrical Specification ...........................................................17
1.2-5.5 V/26 A PMJ 8118L ............................................
1.2 V/26 A Electrical Specification ...........................................................20
1.5 V/26 A Electrical Specification ...........................................................23
1.8 V/26 A Electrical Specification ...........................................................26
2.5 V/26 A Electrical Specification ...........................................................29
3.3 V/26 A Electrical Specification ...........................................................32
5.0 V/26 A Electrical Specification ...........................................................35
EMC Specification ........................................................... 38
Operating Information ...........................................................38
Thermal Consideration ...........................................................40
Connections ...........................................................41
Mechanical Information ...........................................................42
Soldering Information ...........................................................44
Delivery Information ...........................................................46
Product Qualification Specification ...........................................................47
Ericsson Internal
E
PRODUCT SPECIFICATION 2 (3)
Prepared (also subject responsible if other) No.
Henrik Sundh (MPM/BY/P) 1/1301 BMR 646 8 Uen
2
Technical Speci cation
Approved Checked Date Rev Reference
EN/LZT 146 327 R1B April 2006
PMJ 8000 series
MPM/BY/M [Krister Lundberg] 2006-4-10 B
Ericsson Power Modules AB
POL regulator, Input 10.8-13.2 V, Output 26 A/143 W
Compatibility with RoHS requirements)
General Information
The products are compatible with the relevant clauses and
requirements of the RoHS directive 2002/95/EC and have a
Ordering Information
maximum concentration value of 0.1% by weight in
See Contents for individual product ordering numbers.
homogeneous materials for lead in other applications other
than lead in solder, lead in high melting temperature type
Option Suffix
solder, lead in glass of electronics components, lead in
Through hole pin P PMJ8118LP
electronic ceramic parts and lead as an alloying element in
SMD pin S PMJ8118LS
SMD pin, leadfree reflow copper containing up to 4% lead by weight, mercury,
temperature capable R PMJ8118LSR hexavalent chromium, PBB and PBDE and of 0.01% by
weight in homogeneous materials for cadmium.
Reliability
Exemptions in the RoHS directive utilized in the products:
The Mean Time Between Failure (MTBF) is calculated at full
- Lead as an alloying element in copper alloy containing
output power and an operating ambient temperature (T ) of
A
up to 4% lead by weight (used in connection pins
+40C. Different methods could be used to calculate the
made of Brass)
predicted MTBF and failure rate which may give different
- Lead in high melting temperature type solder (used to
results. Ericsson Power Modules currently uses Telcordia
solder the die in semiconductor packages)
SR332.
- Lead in glass of electronics components and in
electronic ceramic parts (e.g. fill material in chip
Predicted MTBF for the series is:
resistors)
- 2.03 million hours according to Telcordia SR332, issue
- Lead in solder for servers, storage and storage array
1, Black box technique.
systems, network infrastructure equipment for
switching, signalling, transmission as well as network
Telcordia SR332 is a commonly used standard method
management for telecommunication
intended for reliability calculations in IT&T equipment. The
(Note: the products are manufactured in lead-free
parts count procedure used in this method was originally
soldering processes and the lead present is only
modelled on the methods from
located in the terminal plating finishes on some
MIL-HDBK-217F, Reliability Predictions of Electronic
components)
Equipment.
It assumes that no reliability data is available on the actual
Quality Statement
units and devices for which the predictions are to be made,
The products are designed and manufactured in an
i.e. all predictions are based on generic reliability
parameters. industrial environment where quality systems and methods
like ISO 9000, 6 (sigma), and SPC are intensively in use to
boost the continuous improvements strategy. Infant
mortality or early failures in the products are screened out
and they are subjected to an ATE-based final test.
Conservative design rules, design reviews and product
qualifications, plus the high competence of an engaged
work force, contribute to the high quality of our products.
Warranty
Warranty period and conditions are defined in Ericsson
Power Modules General Terms and Conditions of Sale.
Limitation of Liability
Ericsson power Modules does not make any other
warranties, expressed or implied including any warranty of
merchantability or fitness for a particular purpose
(including, but not limited to, use in life support
applications, where malfunctions of product can cause
injury to a persons health or life).