PRODUCT SPECIFICATION 1 (4)
Prepared (also subject responsible if other) No.
JIDLZHAO 1/1301-BMR 640 1411+ Uen
Technical Specication
Approved Checked Date Rev Reference
EN/LZT 146300 R6A Oct. 2017
PKR 4000A series Direct Converters
2017-10-23 H
Flex
nput 36-75 V, Output up to 3 A / 15 W
Key Features
Industry standard footprint
47.8 x 28.1 x max height 8.0 mm (1.88 x 1.11 x max
height 0.32 in.)
High efficiency, typ. 84 % at 5.0 Vout full load
1500 Vdc input to output isolation
Meets isolation requirements equivalent to basic
insulation according to IEC/EN/UL 60950
o
More than 6.0 million hours predicted MTBF at 40 C
ambient temperature
General Characteristics
Input under voltage protection
Over temperature protection
Output short-circuit protection
Over current protection
Soft start
Safety Approvals Design for Environment
Remote control
Output voltage adjust function
Highly automated manufacturing to ensure highest
quality
Meets requirements in high-
ISO 9001/14001 certified supplier
temperature lead-free soldering
processes.
The MacroDens PKR 4000A series true component level
on-board DC/DC power modules are intended as distributed
power sources in decentralized 48 and 60VDC power
systems.
Contents
General Information ............................................................. 2
Safety Specification ............................................................. 3
Absolute Maximum Ratings ............................................................. 4
Product Program Ordering No.
3.3V, 3A / 9.9W Electrical Specification PKR 4910A SI ............................................................. 5
5.0V, 3A / 15W Electrical Specification PKR 4211A SI ............................................................. 8
7.0V, 2.2A / 15W Electrical Specification PKR 4117A SI ........................................................... 11
+3.3V, 2.1A / +5.0V, 0.5A / 9.5W Electrical Specification PKR 4928A SI ........................................................... 14
+12V, 0.6A / -12V, 0.6A / 15W Electrical Specification PKR 4221A SI ........................................................... 17
EMC Specification ........................................................... 20
Operating Information ........................................................... 21
Thermal Consideration ........................................................... 22
Connections ........................................................... 23
Mechanical Information ........................................................... 24
Soldering Information ........................................................... 27
Delivery Information ........................................................... 29
Product Qualification Specification ........................................................... 30
PRODUCT SPECIFICATION 2 (4)
Prepared (also subject responsible if other) No.
JIDLZHAO 1/1301-BMR 640 1411+ Uen
2
Technical Specication
Approved Checked Date Rev Reference
EN/LZT 146300 R6A Oct. 2017
PKR 4000A series Direct Converters
2017-10-23 H
Flex
nput 36-75 V, Output up to 3 A / 15 W
declarations preparing for the obligations to communicate
information on substances in the products.
Ordering Information
Product program Output
Quality Statement
PKR 4910A 3.3 V, 3.0 A / 9.9 W
The products are designed and manufactured in an
PKR 4211A 5.0 V, 3.0 A / 15 W
industrial environment where quality systems and methods
PKR 4117A 7.0 V, 2.2 A / 15 W
like ISO 9000, Six Sigma, and SPC are intensively in use to
+3.3 V, 2.1 A/ +5.0 V,
PKR 4928A boost the continuous improvements strategy. Infant
0.5 A/ 9.5 W
mortality or early failures in the products are screened out
+12 V, 0.6 A/ -12 V, 0.6
and they are subjected to an ATE-based final test.
PKR 4221A
A/ 15 W
Conservative design rules, design reviews and product
See Contents for individual product ordering numbers. qualifications, plus the high competence of an engaged
work force, contribute to the high quality of the products.
Option Suffix Ordering No.
SMD, lead-free surface finish S PKR 4910A SI
Warranty
Through hole pin P PKR 4910A PI
Warranty period and conditions are defined in Flex General
Terms and Conditions of Sale.
General Information
Limitation of Liability
Reliability
Flex does not make any other warranties, expressed or
The Mean Time Between Failure (MTBF) is calculated at
implied including any warranty of merchantability or fitness
full output power and an operating ambient temperature
for a particular purpose (including, but not limited to, use in
(TA) of +40C, which is a typical condition in Information
life support applications, where malfunctions of product can
and Communication Technology (ICT) equipment. Different
cause injury to a persons health or life).
methods could be used to calculate the predicted MTBF
and failure rate which may give different results. Flex
Flex 2017
currently uses one method, Telcordia SR332.
The information and specifications in this technical
Predicted MTBF for the series is: specification is believed to be correct at the time of
publication. However, no liability is accepted for
- 6.0 million hours according to Telcordia SR332, issue inaccuracies, printing errors or for any consequences
1, Black box technique.
thereof. Flex reserves the right to change the
contents of this technical specification at any time without
Telcordia SR332 is a commonly used standard method prior notice.
intended for reliability calculations in ICT equipment. The
parts count procedure used in this method was originally
modelled on the methods from MIL-HDBK-217F, Reliability
Predictions of Electronic Equipment. It assumes that no
reliability data is available on the actual units and devices
for which the predictions are to be made, i.e. all predictions
are based on generic reliability parameters.
Compatibility with RoHS requirements
The products are compatible with the relevant clauses and
requirements of the RoHS directive 2011/65/EU and have a
maximum concentration value of 0.1% by weight in
homogeneous materials for lead, mercury, hexavalent
chromium, PBB and PBDE and of 0.01% by weight in
homogeneous materials for cadmium.
Exemptions in the RoHS directive utilized in Flex products are
found in the Statement of Compliance document.
Flex fulfills and will continuously fulfill all its obligations under
regulation (EC) No 1907/2006 concerning the registration,
evaluation, authorization and restriction of chemicals (REACH)
as they enter into force and is through product materials