X-On Electronics has gained recognition as a prominent supplier of FLUKE-700P24 CALIBRATION EQUIPMENT across the USA, India, Europe, Australia, and various other global locations. FLUKE-700P24 CALIBRATION EQUIPMENT are a product manufactured by Fluke. We provide cost-effective solutions for CALIBRATION EQUIPMENT, ensuring timely deliveries around the world.

FLUKE-700P24 Fluke

FLUKE-700P24 electronic component of Fluke
Images are for reference only
See Product Specifications
Part No.FLUKE-700P24
Manufacturer: Fluke
Category: Calibration Equipment
Description: Calibration Equipment PRESSURE MODULE 0- 0-15 PSID WET
Datasheet: FLUKE-700P24 Datasheet (PDF)
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)

1: USD 3534.3628 ea
Line Total: USD 3534.36

Availability - 0
MOQ: 1  Multiples: 1
Pack Size: 1
Availability Price Quantity
0 - WHS 1


Ships to you between Fri. 21 Jun to Thu. 27 Jun

MOQ : 1
Multiples : 1
1 : USD 3534.3628

   
Manufacturer
Product Category
RoHS - XON
Icon ROHS
Series
Equipment Type
Measured Components
Accessory Type
Description/Function
Display Type
Pressure Range
Brand
Factory Pack Quantity :
LoadingGif
 
Notes:- Show Stocked Products With Similar Attributes.
Image Part-Description
Stock Image 1273185
HEAVY DUTY TEST LEAD SET
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 1547885
Fluke METER CASE,LEATHER,LARGE
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 1576734
Fluke FLUKEVIEW FORMS WITH CABLE FOR USE WITH 18X, 28X DMMS
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 1610115
AC280 Suregrip Hook Clips
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 1LAC-A
LOW VOLTAGE DETECTOR AMERICAS PACIFIC AVAILABLE IN 12 PA
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 114519
AC/DC CURRENT PROBE, SCOPEMETER(R)
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 1503
Insulation Resistance Testers
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 1630
Fluke 1630 Earth Ground Clamp Meter
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 190-102/AM
Oscilloscope (DSO) + DMM - 2 Ch, 100 MHz -- 6" Color TFT LCD -- 8 bit, 1.25Gs/S Portable Scopemeter® ...
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 1623-2-KIT
Basic GEO Earth Ground Tester Kit
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Image Part-Description
Stock Image PRC10
Calibration Equipment Current Calibrator/ Meter
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image PRC15
Calibration Equipment Current & Voltage Calibrator/Meter
Stock : 4
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 412355A
Calibration Equipment CURRENT AND VOLTAGE CALIBRATOR
Stock : 3
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 461895
Counters & Tachometers Tachometer, Combination Photo/Contact
Stock : 3
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 461893
Calibration Equipment TACHOMETER PHOTO
Stock : 0
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 461920
Calibration Equipment TACHOMETER COUNTER
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image TACH-10
Calibration Equipment TACH-10 Tachometer Contact/Non-Contact
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 461825
Calibration Equipment STROBOSCOPE/TACHOM
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 461830
Calibration Equipment DIGITAL STROBOTACH 115VAC 60Hz
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 7100008186
Calibration Equipment 3M Calibration Kit 529-04-49, 1 EA/Case
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.

We are delighted to provide the FLUKE-700P24 from our Calibration Equipment category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the FLUKE-700P24 and other electronic components in the Calibration Equipment category and beyond.

700P04 PRESSURE MODULE RANGE 15 PSID/G 100 kPa 1 bar Certifications Conforms to European Standard EN61010-1, EN61326. Limited Warranty 700P2X Series Pressure Modules Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is one year Instruction Sheet and begins on the date of shipment. Parts, product repairs and services are warranted for 90 days. This warranty extends only to the original buyer or end user customer of a Fluke authorized reseller, and does not apply to fuses, disposable batteries or to any product which, in Flukes opinion, has been misused, altered, neglected or damaged by accident or abnormal conditions of Low operation or handling. Fluke warrants that software will operate substantially in Differential accordance with its functional specifications for 90 days and that it has been properly recorded on nondefective media. Fluke does not warrant that software will be error free or operate without interruption. Fluke authorized resellers shall extend this warranty on new and unused High products to enduser customers only but have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price. Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased in one country is submitted for repair in another country. Flukes warranty obligation is limited, at Flukes option, to refund of the purchase price, free of charge repair, or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period. Introduction To obtain warranty service, contact your nearest Fluke authorized service center The Fluke 700P2X Series Pressure Modules allow you to or send the product, with a description of the difficulty, postage and insurance measure pressure with the Fluke 700 Series Documenting prepaid (FOB Destination), to the nearest Fluke authorized service center. Fluke Process Calibrators. Read this sheet before you use the assumes no risk for damage in transit. Following warranty repair, the product pressure module. This sheet contains specifications and will be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that the failure was caused by misuse, alteration, accident or information about how to avoid damaging the pressure abnormal condition of operation or handling, Fluke will provide an estimate of module. See the 700 Series Users Manual for operating repair costs and obtain authorization before commencing the work. instructions. Following repair, the product will be returned to the Buyer transportation prepaid Note and the Buyer will be billed for the repair and return transportation charges (FOB Fluke-701 or Fluke-702 software V1.3 or higher is Shipping Point). required. See specification footnote 1. THIS WARRANTY IS BUYERS SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING The pressure module measures pressure using an internal BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY microprocessor. It receives operating power from and sends OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE digital information to the 700 Series calibrator. LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING Gage pressure modules have one pressure fitting and FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT, measure pressure with respect to atmospheric pressure. RELIANCE OR ANY OTHER THEORY. Differential pressure modules have two pressure fittings and Since some countries or states do not allow limitation of the term of an implied measure the difference between the applied pressure on the warranty, or exclusion or limitation of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every buyer. If any high fitting versus the low fitting. A differential pressure provision of this Warranty is held invalid or unenforceable by a court of module functions like a gage module when the low fitting is competent jurisdiction, such holding will not affect the validity or enforceability of open. any other provision. In Case of Difficulty Box Contents For service or calibration, call your nearest authorized Fluke Pressure module, strap, 1/4 NPT to 1/4 ISO metric adapters, Service Center. instruction sheet. For application or operation assistance or information on Protecting Yourself from Pressure Releases Fluke products, call: To avoid a violent release of pressure in a pressurized system, shut off the isolation valve and slowly bleed off the USA: 1-888-99-FLUKE (1-888-993-5853) Canada: 1-800-36-FLUKE (1-800-363-5853) pressure before you attach or remove the pressure module Europe: +31 402-678-200 from the pressure line. Japan: +81-3-3434-0181 Singapore: +65-738-5655 Avoiding Mechanical Damage Anywhere in the world: +1-425-446-5500 To avoid damaging the pressure module, never apply more Or, visit Flukes Web site at w ww.fluke.com than 10 ft.-lbs. of torque between the pressure module fittings or between the fittings and the body of the module. Always Fluke Corporation Fluke Europe B.V. apply appropriate torque between the pressure module fitting P.O. Box 9090 P.O. Box 1186 and connecting fittings or adapters. Figure 1 shows the Everett, WA 98206-9090 5602 B.D. Eindhoven correct way and incorrect ways to use a wrench when USA The Netherlands applying torque to the pressure module fitting. PN 601093 (English) August 1995 Rev.2, 11/01 1995-2001 Fluke Corporation. All rights reserved. Printed in USAPRESSURE MODULE 700P04 RANGE 15 PSID/G 100 kPa 1 bar Pressure Calibration Kit The Fluke-700PCK Pressure Calibration Kit makes it possible to calibrate pressure modules at ambient temperature with a precision pressure calibrator better than the module specification. A 386 or better PC and Windows 3.1 or later are required. The kit is an optional accessory available from your distributor or Fluke. Performance Test If you need to check that the pressure module meets its accuracy specification, use a dead weight tester or suitable pressure calibrator. The accuracy of the dead weight tester or pressure calibrator should be significantly better than the Figure 1. 700P2X Series pressure specification. Proceed as follows to verify that a pressure module is operating within Avoiding Overpressure Damage specification: Applying pressure in excess of the BURST PRESSURE 1. Read the pressure value with no externally applied specified on the pressure module can destroy the pressure pressure to make sure the 0% of scale is correct. When module. Burst pressure is 3X full scale. reading the pressure, press the ZERO key to remove any zero offset. Avoiding Corrosion Damage Note To avoid damaging the pressure module from corrosion, use The pressure ZERO function is available on Fluke- it only with specified media as shown below: 701 and Fluke-702 calibrators with V1.3 or higher software. Contact your Fluke Service Center for High: any medium that is compatible with type 316 upgrade of earlier calibrators. stainless steel. 2. Connect the pressure module to a dead weight tester. Low: dry, noncorrosive gasses only. 3. Set the dead weight tester to 20% of the pressure modules full scale value. Recommended Measurement Technique For best results, it is recommended that the module be 4. Make sure the reading agrees with the dead weight pressurized to full scale and then vented to zero pressure tester value within the specification in Table 1. (atmosphere) prior to zeroing and making measurements. 5. Set the dead weight tester to 40, 60, 80, and 100% of Note full scale and compare the respective readings. Low range pressure modules may be sensitive to 6. If temperature sensitivity is of concern, repeat steps 1 gravity. For best results, pressure modules 30 psi through 5 at various controlled temperatures. and below should be held at the same physical orientation from the time they are zeroed until the measurement is complete. 1 Table 1. Specifications (% of full span) 2 Model Range Gage or Isolated or Reference Stability Temp Total 3 Differential Nonisolated Uncertainty (1 Year) (0 to 50 C) Uncertainty (23 3 C) Fluke-700P22 0 to 1.0000 psi Differential Isolated 0.100% 0.020% 0.030% 0.150% 0 to 6.8900 kPa 0 to 6.89 E-2 bar Fluke-700P23 0 to 5.0000 psi Differential Isolated 0.025% 0.010% 0.015% 0.050% 0 to 34.000 kPa 0 to 0.3400 bar Fluke-700P24 0 to 15.000 psi Differential Isolated 0.025% 0.010% 0.015% 0.050% 0 to 100.00 kPa 0 to 1.0000 bar 1. Use of pressure zero function is required to achieve these specifications. Contact your Fluke Service Center for upgrade of your Fluke 701 or Fluke 702 V1.0, V1.1, or V1.2 Calibrator. 2 2. Available pressure units (inHg, kg/cm , mmH 0) are determined by the calibrator being used. 2 3. Accuracy specifications apply for 1 year for 0 to 100% of full span from 0 to 50 C. Typical uncertainty is 1% of full span from -10 C to 0 C. 4. Maximum non-destructive pressure: 3X maximum rated pressure, including common mode pressure. 5. Maximum common mode pressure: 3X maximum rated pressure. 6. Specifications reflect a confidence interval of 95%.

Tariff Desc

8543.70.00 Other machines and apparatus Free
13 Signal processors (graphic equalisers, crossovers etc.) 91 Other Free

9027.10.00 Instruments and apparatus for physical or chemical analysis (eg, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes Free

9031.80.00 MEASURING OR CHECKING INSTRUMENTS, APPLIANCES AND MACHINES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER; PROFILE PROJECTORS Other instruments, appliances and machines Free

9030.31.00 Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of 9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, x-ray, cosmic or other ionising radiations.
Other instruments and apparatus, for measuring or checking voltage, current, resistance or power Multimeters without a recording device Free

8473.30.00 Parts and accessories of the machines of 8471 AUTOMATIC DATA PROCESSING MACHINES AND UNITS THEREOF; MAGNETIC OR OPTICAL READERS, MACHINES FOR TRANSCRIBING DATA ONTO DATA MEDIA IN CODED FORM AND MACHINES FOR PROCESSING SUCH DATA, NOT ELSEWHERE SPECIFIED OR INCLUDED:
.Other 71 No Weighing less than 1kg Free

8537 BOARDS, PANELS, CONSOLES, DESKS, CABINETS AND OTHER BASES, EQUIPPED WITH TWO OR MORE APPARATUS OF 8535 OR 8536, FOR ELECTRIC CONTROL OR THE DISTRIBUTION OF ELECTRICITY, INCLUDING THOSE INCORPORATING INSTRUMENTS OR APPARATUS OF CHAPTER 90, AND NUMERICAL CONTROL APPARATUS, OTHER THAN SWITCHING APPARATUS OF 8517:
8538 PARTS SUITABLE FOR USE SOLELY OR PRINCIPALLY WITH THE APPARATUS OF 8535, 8536 OR 8537:
8538.10.10 22 For programmable controllers Free
Fluke Electronics
FLUKE NETWORKS

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON Electronics
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronic Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing.
All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted