714 English Instruction Sheet Page 1 714 Thermocouple Calibrator Instruction Sheet Introduction The Fluke 714 Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments. The calibrator sources or measures in units of C, F, or mV, through a thermocouple minijack. Your calibrator is supplied with a Flex-Stand holster, an installed 9 V alkaline battery, and this instruction sheet. Sets of thermocouple miniplugs are available from Fluke. (Accessories Fluke-700TC1 and Fluke-700TC2 TC Miniplug Kits.) If the calibrator is damaged or something is missing, contact the place of purchase immediately. Contact your Fluke distributor for information about accessories. To order replacement parts or spares, see Replacement Parts. The following tables list the thermocouple types supported by the calibrator, the standards and scales used for each type, the thermocouple properties, and calibrator resolution. Full calibrator specifications are listed at the end of this instruction sheet. Note Since mV input and output units are available, you can use the calibrator for any thermocouple type by making manual calculations or referring to tables. PN 650306 July 1997 Rev. 1, 10/97 1997 Fluke Corporation. All rights reserved. Printed in U.S.A. All product names are trademarks of their respective companies.714 English Instruction Sheet Page 2 Thermocouple Standards and Scales Thermocouple Type Standard Scale J, K, T, E, R, S, B NIST 175 ITS-90 L (J-DIN), U (T-DIN) DIN 43710 IPTS-68 Thermocouple Properties Thermocouple Temperature Display Resolution Type Ranges J -200 to 1200C, 0.1C or F -328 to 2192F K -200 to 1370C 0.1C or F -328 to 2498F T -200 to 400C 0.1C or F -328 to 752F E -200 to 950C 0.1C or F -328 to 1742F R -20 to 1750C 1C or F -4 to 3182F S -20 to 1750C 1C or F -4 to 3182F B 600 to 1800C 1C or F 1112 to 3272F L -200 to 900C 0.1C or F -328 to 1652F U -200 to 600C 0.1C or F -328 to 1112F