FTPL-1 SureGrip Fused Test Probe and Test Lead set with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present. These modular probes ship with the Fluke TL224 silicone test leads. Rated to CAT III 1000 V, these probes have removable tip guards for reduced probe tip exposure. Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating Fluke fuse part number 803293 Probes allow indication of live voltage even with blown fuse* 2 mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads TL224 leads are right angle connector on one end and straight connector on the other with reinforced strain reliefs, 1.5 meter silicone insulated wire resists heat and cold Operating temperature 20 C to 50 C (-5 F to 120 F) CAT III 1000 V, CAT IV 600 V, 10 A rating One year warranty *Voltage readings with blown fuse are approximate and vary with the meter impedance. Before and after each measurement, verify presence of blown fuse by checking continuity of the fused test probe. Current mode is non-functional with blown fuse. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Test Probes category: Click to view products by Fluke manufacturer: Other Similar products are found below : 6214 6265 6474 815003 923832-BK-B P-KIT-1 R941850000 923837-YL-B 925250-R 72923-2 923848-C 973368101 972318101 972318100 MXHQ87WJ3000 66.9115-23 850182 TAS90 VL1735/45 973368100 972327100 972327101 975017700 975018700 973995100 973995101 100039-080-958 CT3986B-120 CT3987B-120 CT3983B-120 CT3979B-150 CT3981B-120 CT3985B-120 402-IEC- RT 402-IEC-SW 404-IEC-RT AX-CP-01-SET AX-CP-05-B AX-CP-05-R 464-IEC-NEEDLE13/0,6-RT 464-IEC-NEEDLE13/0,6-SW 464- IEC-RT 464-IEC-SW 00043 404-IEC-SW 00125 1445 MPS1RT 0602 4592 0602 0645