P5500 Series Hydraulic and Technical Data pneumatic comparison test pumps, media separators and accessories Hydraulic comparison test pumps Fluke Calibration hydraulic test pumps are used for checking pressure measuring instruments against master test gauges, indicators or transducers. These cost effective instruments, which include several features from our popular line of hydraulic deadweight testers, are capable of easily generating high pressures and provide precise control for important calibration requirements. Model P5515 Model P5514 Built-in pump Bench mount design for large Screw press for volume appli- fine pressure cations and adjustments system priming Test connections High quality can be made screw press for without the need fine pressure for PTFE tape or control wrenches Acrylic res- Compatible with a ervoir for wide range of fluids visibility of fluid level and quality including sebacate, Test port adapters which require no PTFE tape or mineral oil, and distilled water. wrenches Built-in drain plug for removal of old fluid The standard O-ring seals are Viton. Ethylene Sturdy carrying case with lid Propylene seals are available for use with phosphate- Compatible with a wide range of fluids including ester-based fluids. sebacate, mineral oil, and distilled water. Model O-ring Model O-ring P5515-140M Viton P5514-70M Viton P5515-140M-EP Ethylene Propylene P5514-70M-EP Ethylene Propylene Hydraulic comparison test pumps Model P5515 Model P5514 Pressure range 0 psi to 20,000 psi (140 MPa) 0 psi to 10,000 psi (70 MPa) Test port adapters M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter) (plus 1 additional 1/4 NPT adapter) Weight 16 kg (36 lb) 5 kg (11 lb) Dimensions (W x D x H) 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in) 279.4 mm x 279.4 mm x 254 mm (11 in x 11 in x 10 in) 3 3 3 3 Reservoir volume 150 cm (9.2 in ) 75 cm (4.6 in ) 3 3 3 3 Screw press displacement 5.5 cm (0.34 in ) 20 cm (1.2 in ) 3 3 Priming Pump displacement 4.7 cm (0.29 in) per stroke sales GlobalTestSupply.com Fluke-Direct.com 1.888.610.7664 Pneumatic comparison test pumps These pneumatic comparison test pumps are designed for testing pressure measuring instruments against master test instruments. These cost effective instruments provide precise control for impor- tant calibration requirements and include many features found in our popular line of pneumatic deadweight testers. Model P5510 Model P5513 Dual pressure/ High pressure vacuum capability pneumatic Bench mount design operation Built-in handpump Screw press for as pressure/vacuum fine pressure source adjustments High quality needle High quality valve for fine control needle valves Test port adapt- for fine control ers which require Test port no PTFE tape or adapters which wrenches require no PTFE tape or wrenches Sturdy carrying case with lid Note: P5513 requires a pressure source, such as a nitrogen bottle, for operation. Pneumatic comparison test pumps Model P5510-2M Model P5513-20M Pressure range 0 psi to 300 psi (2 MPa) 0 psi to 3,000 psi (21 MPa) Vacuum range 0 in to 27 in Hg (915 mbar 90% vacuum) Test port adapters M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP M20 X 1.5, M14 X 1.5, 1/8, 1/4, 3/8, and 1/2 NPT and BSP (plus 1 additional 1/4 NPT adapter) (plus 1 additional 1/4 NPT adapter) Weight 3.5 kg (7.5 lb) 8 kg (17 lb) Dimensions (W x D x H) 240 mm x 330 mm x 180 mm (9.5 in x 13 in x 7 in) 440 mm x 300 mm x 215 mm (17.5 in x 12 in x 8.5 in) Gas supply connection 1/4 NPT female 2700G Reference Pressure Gauge Provides best-in- class 0.02% FS accuracy Available in ranges up to 10,000 psi (70 MPa) Can be used with P5500 Series Com- parison Test Pumps for a complete pressure calibration solution 2 Fluke Calibration P5500 Series hydraulic and pneumatic comparison test pumps, media separators and accessories sales GlobalTestSupply.com Fluke-Direct.com 1.888.610.7664