FSM-IMX415C-01S-V1A FRAMOS

FSM-IMX415 Datasheet Sony IMX415-AAQR Sensor Module FRAMOS Sensor Module FSM-IMX415 FSM-IMX415C v1.0f Datasheet Specification Model Name FSM-IMX415C (v1a) Image Sensor Sony Vendor / Name IMX415-AAQR Technology CMOS Rolling Shutter Chromaticity Color Optical Format 1/2.8 Pixel Size 1.45 x 1.45 m Max. Resolution 8.4 Mpx / 3864 x 2176 px Framerate (max.) 90 FPS (at max. resolution) Key Benefits & Features: Bit Depth(s) 10 / 12 bit 8.4 Mpx Sony CMOS Rolling Shutter sensor Interface module, ready to embed Module Interface MIPI CSI-2 (2 / 4 Lane) All FSMs are part of a rapid prototyping Control Interface IC ecosystem, consisting of: Clock Frequency(s) 24 / 27 / 37.125 / 72 / 74.25 MHz Adapters to various processing boards Voltage Requirements 1.1V / 1.8V / 2.9V Design sources for deep embedding Interface Connector Hirose DF40C-60DP-0.4V(51) Various accessories and design in services EEPROM (Sensor ID) No FSM-IMX415C (Color): Mechanical Dimensions (HxWxD) 26.5 mm x 26.5 mm x 4.33 mm Environmental -30C to +85C (function) Operating Temperature -10C to +60C (performance) Storage Temperature -40C to +85C Ambient Humidity 20% to 95% RH, non condensing Software Support Driver V4L2 Based Device Driver Supported Platform(s) NVIDIA Jetson TX2 / AGX Xavier Linux Version(s) L4T 32.2.1 (JetPack 4.2.2) API Languages C / C++ Suggested Accessories Flex Cable 150 mm (FSM to FSA) FMA-FC-150/60 Lens Mounts: M12 or C/CS-Mount options A matrix with compatible Sensor Adapters (FSA) and Processor Board Adapters (FPA) for single- and multi-sensor setups can be found separately at the end of this document. Available in Development Kit Version v1.0f from 2019-12-06 www.framos.com FRAMOS 2019, information is subject to change without prior notice. FSM-IMX415C Datasheet Mechanical Drawing Sensor image optical center is in mechanical board center. Connector Pinout Type: Hirose DF40C-60DP-0.4V(51) Mating Type: Hirose DF40HC(4.0)-60DS-0.4V(51) Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 Pin 1 according to print on PCB. Pin 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 All signals are routed directly from image sensor to connector. Details on specific signals are described in the respective image sensor datasheet. Version v1.0f from 2019-12-06 www.framos.com FRAMOS 2019, information is subject to change without prior notice. Name Name NC NC NC NC 1V1 2V9 1V1 2V9 NC 1V8 GND GND GND GND NC XCLR NC NC NC NC NC SCL NC NC NC XVS NC SDA TENABLE XHS TOUT XTRIG NC NC SLAMODE2 SLAMODE1 GND GND NC INCK NC NC GND GND D DATA 3 P NC D DATA 3 N NC GND GND D DATA 1 N D DATA 0 N D DATA 1 P D DATA 0 P GND GND D CLK 0 P D DATA 2 P D CLK 0 N D DATA 2 N