VA-PSU-US1

VM800C Datasheet Version 1.3 Document Reference No.: BRT 000003 Clearance No.: BRT 005 FTDI Chip VM800C Datasheet Embedded Video Engine Credit Card Board General Purpose Multi Media Controller 1.1 Features 1 Introduction The VM800C is a development module for FTDIs The VM800C utilises the FTDI FT800 Embedded Video FT800, which is used to develop and demonstrate Engine. Graphic, audio and touch features of the the functionality of the FT800 Embedded Video FT800 can be accessed with the VM800C. For a full Engine, EVE. This module behaves as an SPI slave, list of the FT800s features please see the FT800 and requires a SPI Master for proper micro- datasheet. controller interfacing and system integration. The VM800C has the following features: Ready to use LCD module VM800C modules support 3 different LCD panel size options. Users can also connect to different Part types with LCDs supporting resistive touch LCD screens as long as they meet the FT800 with pressure sensing. technical specification and fit the VM800C LCD connector. On board LCD backlight LED Driver VM800C35A-D, 3.3/5V micro-controller adaptor card with 3.5 LCD touch display Supports mono audio output VM800C43A-D, 3.3/5V micro-controller On board audio power amplifier and micro speaker adaptor card with 4.3 LCD touch display VM800C50A-D, 3.3/5V micro-controller Flexible power supply. Powering the VM800C using adaptor card with 5.0 LCD either a 2.1mm power jack , SPI master connector or via USB Micro-B port VMFT800C35A-N, 3.3/5V micro-controller adaptor card, with 3.5 LCD connector but 5 V tolerant buffers when used with a 5V SPI no display Master. VMFT800C43A-N, 3.3/5V micro-controller adaptor card, with 4.3/5.0 LCD connector but no display Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Bridgetek Limited 1 VM800C Datasheet Version 1.3 Document Reference No.: BRT 000003 Clearance No.: BRT 005 2 Ordering Information Note that the kits below require a 5V/1A power supply. It is NOT provided in the development kit, but is offered as an optional accessory, as is the USB to SPI cable, with the following part types: Part No. Description VM800C35A-N Credit Card Size VM800C module, supports 3.3/5v MCU Adapter Board, with FPC/FFC 54 LCD connector. No display is provided. VM800C43A-N Credit Card Size VM800C module, supports 3.3/5v MCU Adapter Board, with FPC/FFC 40 LCD. No display is provided. VM800C35A-D Credit Card Size VM800C module, supports 3.3/5v MCU Adapter Board, with FPC/FFC 54 LCD connector, 3.5 inch TFT LCD display panel preinstalled. Credit Card Size VM800C module, supports 3.3/5v MCU Adapter Board, with VM800C43A-D FPC/FFC 40 LCD connector, 4.3 inch TFT LCD display panel preinstalled. Credit Card Size VM800C module, supports 3.3/5v MCU Adapter Board, with VM800C50A-D FPC/FFC 40 LCD connector, 5.0 inch TFT LCD display panel preinstalled. VA-PSU-UK1 Accessory - UK Model 5V/1A USB Power Supply (Mfr JX-B0520C-1-B) VA-PSU-US1 Accessory - US Model 5V/1A USB Power Supply (Mfr JX-B0520B-1-B) VA-PSU-EU1 Accessory - EU Model 5V/1A USB Power Supply (Mfr JX-B0520A-1-B) Accessory - High Speed Micro USB to SPI adapter for BASIC boards based on VA800A-SPI FT232H MPSSE design VA-FC-1M-BKW Accessory - Flat USB A to Micro B Cable 1M- Black and White VA-FC-1M-BLW Accessory - Flat USB A to Micro B Cable 1M- Blue and White VA-FC-STYLUS1 Accessory - Resistive Touch Screen Pen Stylus Table 2-1 Ordering information Copyright Bridgetek Limited 2