VM810C EVE2 Credit Card Module Version 1.2 Document Reference No.: BRT 000014 Clearance No.: BRT 019 FTDI Chip VM810C Datasheet Embedded Video Engine Credit Card Board General Purpose Multi Media Controller 1.1 Features 1 Introduction The VM810C is a development module for FTDIs The VM810C utilises the FTDI FT810 Embedded FT810, which is used to develop and demonstrate Video Engine. Graphic, audio and touch features of the functionality of the FT810 Embedded Video the FT810 can be accessed with the VM810C. For a Engine, EVE. This module behaves as an SPI full list of the FT810s features please see the FT810 slave, and requires a SPI Master for proper micro- datasheet. controller interfacing and system integration. The VM810C has the following features: Ready to use LCD module VM810C modules support 5.0 LCD panel size options. Users can also connect to different LCD Options with or without 5 LCDs supporting screens as long as they meet the FT810 technical resistive touch with pressure sensing specification and fit the VM810C LCD connector. On board LCD backlight LED Driver VM810C50A-D, 3.3/5V micro-controller adaptor card with 5.0 LCD Supports mono audio output VM810C50A-N, 3.3/5V micro-controller adaptor card, with 4.3/5.0 LCD On board audio power amplifier and micro connector but no display speaker Flexible power supply. Powering the VM810C using SPI host connector, or via USB Micro-B port, or via a 2.0mm JST connector 5 V tolerant buffers when used with a 5V SPI Master. Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640 Copyright Bridgetek Limited 1 VM810C EVE2 Credit Card Module Version 1.2 Document Reference No.: BRT 000014 Clearance No.: BRT 019 2 Ordering Information Note that the kits below require a 5V/1A power supply. It is NOT provided in the development kit, but is offered as an optional accessory, as is the USB to SPI cable, with the following part types: Part No. Description VM810C50A-N Credit Card Size VM810C module, supports 3.3/5v MCU Adapter Board, with FPC/FFC 40 LCD connector. No display is provided. Credit Card Size VM810C module, supports 3.3/5v MCU Adapter Board, with FPC/FFC 40 LCD connector. Includes 5 inch 800x480 TFT LCD display with VM810C50A-D resistive touch panel. VA-PSU-UK1 Accessory - UK Model 5V/1A USB Power Supply (Mfr JX-B0520C-1-B) VA-PSU-US1 Accessory - US Model 5V/1A USB Power Supply (Mfr JX-B0520B-1-B) VA-PSU-EU1 Accessory - EU Model 5V/1A USB Power Supply (Mfr JX-B0520A-1-B) Accessory - High Speed Micro USB to SPI adapter for BASIC boards based VA800A-SPI on FT232H MPSSE design VA-FC-1M-BKW Accessory - Flat USB A to Micro B Cable 1M- Black and White VA-FC-1M-BLW Accessory - Flat USB A to Micro B Cable 1M- Blue and White VA-FC-STYLUS1 Accessory - Resistive Touch Screen Pen Stylus Table 2-1 Ordering information Copyright Bridgetek Limited 2