FTR60 Series Positive Temperature Coefficient (PTC) Data Sheet Description The 60V series provides radial resettable overcurrent protection with holding current from 0.05A to 5.0A. This series is suitable for applications with higher working voltage up to 60V. Features Radial leaded devices. O v er -current protection High voltage surge capabilities Available in lead-free version. Flame retardant epoxy polymer insulating material Operating Temperature: -40 ~+85 meets UL94 V-0 requirement. Meets MSL level 1, per J-STD-020 Applications Powered supplies Industrial controls Security systems General electronics Automotive applications Motor protection Electrical Characteristics Maximum time to trip Resistace Ihold Itrip Vmax Imax Pd typ. Part Number (A) (A) (VDC) (A) (W) Current(A) TimesS Rmin( ) Rmax( ) FTR60-005 0.05 0.10 60 40 0.30 0.25 5.00 7.50 25.00 FTR60-010 0.10 0.20 60 40 0.38 0.50 4.00 2.50 7.50 FTR60-017 0.17 0.34 60 40 0.48 0.85 3.00 1.80 5.80 FTR60-020 0.20 0.40 60 40 0.41 1.00 2.20 1.50 3.30 FTR60-025 0.25 0.50 60 40 0.45 1.25 2.50 1.00 2.20 FTR60-030 0.30 0.60 60 40 0.49 1.50 3.00 0.70 1.55 FTR60-040 0.40 0.80 60 40 0.56 2.00 3.80 0.50 1.10 FTR60-050 0.50 1.00 60 40 0.77 2.50 4.00 0.35 0.85 FTR60-065 0.65 1.30 60 40 0.88 3.25 5.30 0.30 0.65 FTR60-075 0.75 1.50 60 40 0.92 3.75 6.30 0.25 0.55 FTR60-090 0.90 1.80 60 40 0.99 4.50 7.20 0.20 0.45 FTR60-110 1.10 2.20 60 40 1.50 5.50 8.20 0.15 0.33 FTR60-135 1.35 2.70 60 40 1.70 6.75 9.60 0.12 0.27 FTR60-160 1.60 3.20 60 40 1.90 8.00 11.40 0.09 0.22 FTR60-185 1.85 3.70 60 40 2.10 9.25 12.60 0.08 0.18 FTR60-250 2.50 5.00 60 40 2.50 12.50 15.60 0.05 0.11 FTR60-300 3.00 6.00 60 40 2.80 15.00 19.80 0.04 0.09 FTR60-375 3.75 7.50 60 40 3.20 18.50 24.00 0.03 0.08 FTR60-500 5.00 10.00 60 40 3.20 25.00 35.00 0.025 0.05 Ihold= Hold current: maximum current device will pass without tripping in 25 still air. Pd typ.= Typical power dissipated from device when in the tripped state at 23 still air. Itrip= Trip current: minimum current at which the device will trip in 25 still air. Rmin= Minimum resistance of device in initial (un-soldered) state. Rmax= Maximum resistance of device in initial (un-soldered) state. Vmax= Maximum voltage device can withstand without damage at rated current (Imax) Imax= Maximum fault current device can withstand without damage at rated voltage Revision10-May-18 1 / 6 www.ftrqg.com FTR60 Series Test Procedures and Requirement Items Test Conditions Accept/Reject Criteria Resistance In still air 25 R min R R max Time to Trip Specified current, V max , 25 T max. Time to trip (T trip ) Hold Current 30 min, at Ihold No trip Trip Cycle Life V max , I max , 100 cycle No arcing or burning Trip Endurance V max , 24hours No arcing or burning Thermal Derating Chart Ihold Ambient Operation Temperature Part Number -40 -20 0 25 30 40 50 60 70 85 FTR60-005 0.078 0.07 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.02 FTR60-010 0.16 0.14 0.12 0.10 0.09 0.08 0.07 0.06 0.05 0.04 FTR60-017 0.25 0.23 0.20 0.17 0.15 0.14 0.12 0.11 0.09 0.07 FTR60-020 0.30 0.27 0.24 0.20 0.18 0.16 0.14 0.13 0.11 0.08 FTR60-025 0.38 0.34 0.30 0.25 0.23 0.20 0.18 0.16 0.14 0.10 FTR60-030 0.46 0.41 0.36 0.30 0.27 0.24 0.22 0.19 0.16 0.12 FTR60-040 0.60 0.54 0.48 0.40 0.36 0.32 0.29 0.25 0.22 0.16 FTR60-050 0.75 0.68 0.60 0.50 0.45 0.41 0.36 0.32 0.27 0.20 FTR60-065 1.00 0.88 0.77 0.65 0.59 0.53 0.47 0.41 0.35 0.26 FTR60-075 1.15 1.02 0.89 0.75 0.68 0.61 0.54 0.47 0.41 0.30 FTR60-090 1.40 1.22 1.07 0.90 0.81 0.73 0.65 0.57 0.49 0.36 FTR60-110 1.70 1.50 1.31 1.10 0.99 0.89 0.79 0.69 0.59 0.44 FTR60-135 2.05 1.84 1.61 1.35 1.22 1.09 0.97 0.85 0.73 0.54 FTR60-160 2.45 2.18 1.90 1.60 1.44 1.30 1.15 1.01 0.86 0.64 FTR60-185 2.85 2.52 2.20 1.85 1.67 1.50 1.33 1.17 1.00 0.74 FTR60-250 3.85 3.40 2.98 2.50 2.25 2.03 1.80 1.58 1.35 1.00 FTR60-300 4.65 4.08 3.57 3.00 2.70 2.43 2.18 1.89 1.62 1.20 FTR60-375 5.80 5.10 4.46 3.75 3.38 3.04 2.70 2.36 2.03 1.50 FTR60-500 7.75 6.80 5.95 5.00 4.50 4.05 3.60 3.15 2.70 2.00 Revision10-May-18 2 / 6 www.ftrqg.com