Data Sheet FUJITSU Component Thermal Printer FTP-62GDSL001 FUJITSU Component Thermal Printer FTP-62GDSL001 series Interface Board Fujitsu interface board for 24V FTP-60G series Features 24V FTP-62G series I/F board for low profile mechanism and cutter Auto cutter drive compatible (full or partial) Supports high speed serial (RS-232C) or USB (V2.0) Supports bar code and graphics Windows 7, 8, Windows Vista, Linux drivers UL File No. E171434 RoHS compliant FTP-62GDSL Part numbers Part number Interface type Drivers Mechanism part number FTP-62GDSL001 ** USB/RS-232C Windows 7, 8, Vista, Linux FTP-6xGMCL153 FTP-6xGMCL453 Interf acespecificationathostside Item Sp e c ific atio n s RS-232C Data speed: 9.6k, 19.2k, 38.4k, 115.2k, 230.4k, 460.8kbps Synchronous method: Start/stop synchronization Handshake: RTS (DTR) / CTS (DSR) XON/XOFF control Parity: Non, even, odd USB V2.0 Transmission route Full speed 12Mbps Interface class Printer device DIP switch setting DSW1 RS-232C settings (Initial) Bit No. Setting Function Setting Remarks Function Factory Command 62G 2-inch ON Factory setting Baud data 9600 pbs GS E+L1+2+fn+d1 to d9 (fn=67) 1 63G 3-inch OFF Parity Non Flow control RTS / CTS (DTR/DSR) Font Part number Font FTP-62GDSL001 01-R ANK, Thai, Kanji FTP-62GDSL001 02-R ANK, Thai, Traditional Chinese Page 1 of 10 Data Sheet FUJITSU Component Thermal Printer FTP-62GDSL001 Specifications 1.1 Base specifications Item Sp e c ific atio n s Dimensions 70 x 35mm Weight Approx. 15g RS-232C Communication interface *1 USB full speed (max. 12Mbps) 1.2 Print/paper feed specifications Item Sp e c ific atio n s Part number FTP-62GMCL153-R/453-R FTP-63GMCL153-R/453-R Resolution 8 dots/mm Number of dots 432 dots/line 576 dots/line Max. printing width Approx. 54mm Approx. 72mm Max. printing height Approx. 240mm Print speed*1 Max. 200mm/sec. *1: USB is selected if you connect both USB and RS-232C. *2: When printing at low speed, a white line may occur depending on printing pattern or division control. Therefore, please evaluate in a advance when you use low speed printing. Conditions: Paper: PD150R or equivalent Voltage: 24V Print ratio: Up to 144 dots Operating temperature/humidity: 25C, 60+/-15% Page 2 of 10