FTR-K1 SERIES
POWER RELAY
1 POLE - 5A Slim Power Relay
FTR-MY Series
n FEATURES
l Width 5mm, height 12mm (31% smaller than NY series)
2
area 100 mm , super slim , low power, compact and light
weight 2.5gr.
l Nominal power: 110mW (8% less than NY series),
Operate power: 54mW
High sensitive
l High reliable contacts, bifurcated gold overlay silver alloy
(cadmium free)
l Conform to UL61010-1, UL61010-2-201, IEC/EN61010-1,
IEC/EN61010-2-201 (max. 277VAC)
l Dielectric strength: 3,000VAC
l Surge strength: 5,080V
l Safety standards
UL, CSA, VDE, CQC
l RoHS compliant
Please see page 6 for more information
l Plastic sealed type, RTIII
n APPLICATIONS
n PARTNUMBER INFORMATION
FTR-MY A A 012 D
[Example] (a) (b) (c) (d) (e)
(a) Relay type FTR-MY : FTR-MY-Series
(b) Cont act configuration A : 1 form A
(c) Coil type A : Standard type (110mW)
(d) Coil rated voltage 012 : 4.5.....24 VDC
Coil rating table at page 3
(e) Contact material D : Gold overlay AgNi
Actual marking does not carry the type name :FT
E.g.: Ordering code: FTR-MYAA012D Actual marking: MYAA012D
1FTR-K1 SERIES
FTR-MY SERIES
n SPECIFICATION
Item FTR-MY Remarks / Conditions
Contact
Configuration 1 form A
Data
Construction Bifurcated (cross bar)
Material Gold overlay silver alloy
Resistance (initial) Max. 30 m at 6VDC, 1A
Contact rating 5A, 250VAC / 30VDC
Max. carrying current 5A
Max. switching current 5A
Max. switching voltage 277VAC / 125VDC
Max. switching power 1,250VA / 150W
Min. switching load * 1 mA, 5VDC
6
Life Mechanical Min. 20 x 10 operations
3
Min. 100 10 operations
(at 3A 250VAC, 30VDC resistive)
Electrical
3
Min. 50 10 operations
(at 5A 250VAC, 30VDC resistive)
Coil Rated power (at 20 C) 110 mW
Data
Operate power (at 20 C) 54 mW
Operating temperature range -40 C to +90 C (no frost)
Timing
Operate (at nominal voltage) Max. 10 ms (without bounce)
Data
Release (at nominal voltage) Max. 5 ms (without bounce)
Insula- Resistance (initial) Min. 1,000M at 500VDC
tion
Open con-
Dielectric strength 750VAC (50/60Hz) 1min
tacts
Contacts to
3,000VAC (50/60Hz) 1min
coil
Coil to
Surge strength 5,080V / 1.2 x 50s standard wave
contacts
Clearance Min. 5.6mm
Creepage Min. 5.6mm
Other Misopera- Coil ON/OFF, 3 axes, total 6
10 to 55 to 10 single amplitude 0.75mm
Vibration resis-
tion cycles
tance
Endurance 10 to 55 to 10 single amplitude 2.5mm Coil OFF, 3 axes, total 6 hours
Misopera- Coil ON/OFF, 3 axes, total 36
Min. 100m/s (11 1ms)
tion operations
Shock
Coil OFF, 3 axes, total 18 opera-
Endurance Min. 1,000m/s (6 1ms)
tions
Weight Approximately 2.5 g
Sealing Plastic sealed RTIII
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2