5mm pitch: to be discontinued in March 2020
POWER RELAY
1 POLE - 8A Medium Load Control
JS Series
FEATURES
UL class B (130C) coil wire insulation
1 form A (SPST-NO) or 1 form C (SPDT) contact
Low profile and space saving
2
Height: 12.5mm - Mounting space: 290mm
High sensitivity in small package
Operating power 110 to 140mW
Nominal power 220 to 290mW
High insulation in small package
Insulation distance: 8.0mm (between coil and contacts)
Dielectric strength: 5,000VAC
Surge strength: 10,000V
Plastic materials
UL 94 flame class V-0 UL CTI level class 2
Plastic sealed or flux free (reflow capable type)
Various contact material options
RoHS compliant (Please see page 6 for more information)
Part Numbers
[Example] JS - 12 M F - K T - V3* - RW
(a) (b) (c) (d) (e) (f) (g) (h)
(a) Relay type JS : JS series
(b) Coil Voltage 12 : 5....60VDC (Coil rating table at page 3)
(c) Coil configuration Nil : 1 form C (SPDT)
M : 1 form A (SPST-NO)
(d) Contact material D : Silver nickel
F : Gold flash silver nickel
N : Gold flash silver tin oxide
(e) Enclosure Nil : Flux free type (available for reflow capable type)
K : Plastic sealed type
) Construction Nil : 3.2mm
(f
T : 5.0mm (only JS-MN)
: Standard
(g) Gold plating Nil
: 3.0m gold plating for lower current applications (available
V3
with N contact, not available for T, 5.0mm type)
: 1.0m gold plating for lower current applications
V1
(available with N contact, not available for T, 5.0mm type)
(h) Special type Nil : Standard
RW : Reflow capable (through hole reflow)
(not available for V1, V3)SODVWLFVHDOHGW\SH
Note: Actual marking omits the hyphen (-) or (*)
1
*: V3 is market at different position on the relay
E.g.: Ordering code: JS-12F actual marking: JS12F-KJS Series
Specifications
Item JS-( ) JS-( )D JS-( ) JS-( )
Remarks / conditions
N(-K)-V1
F/N(-K) (-K) N(-K)-V3
Contact Configuration 1 form A (SPST-NO), 1 form C (SPDT)
data
Construction Single
Plating Au flash - 1m Au 3m Au
plated plated
Material See partnumber information
Resistance Max. 100m Max. 30m 6VDC, 1A
Contact rating 8A, 250VAC / 24VDC Resistive
Max. carrying current 10A
Max. switching current 400VAC / 300VDC (-RW: 400VAC / 150VDC)
Max. switching power 2000VA / 192W
*1
Min. switching load 100mA, 5VDC 10mA, 5VDC
Coil Rated power (20C) 220 to 290mW
Operate power (20C) 110 to 140mW
Operating temperature range -40C ~ +85C (at rated voltage) No frost
Timing Operate Max. 10ms Without bounce
data
Release Max. 5ms Without bounce, no diode
Life Mechanical Min. 20 x 10 operations
3
Electrical
AC contact rating Min. 50 x 10 operations (AgSnO) At rated load
3
(resistive)
Min. 20 x 10 operations (AgNi)
3
DC contact rating At rated load
Min. 50 x 10 operations (AgSnO)
3
Min. 20 x 10 operations (AgNi)
Insula- Insulation resistance Min. 1000M at 500VDC
tion
Dielectric Open contacts 1000VAC (50/60Hz), 1 minute
strength
Coil contact 5000VAC (50/60Hz), 1 minute
Surge strength Coil to contacts 10000V / 1.2 x 50s standard wave
Clearance 8mm
Creepage 8mm
EN61810-1, Voltage 250V
VDE0435
Pollution 3
Material group III a
Category C / 250V (reference voltage) (VDE 01106)
Other Vibration Misoperation 10~55~10Hz single amplitude 0.825mm
resistance
Endurance 10~55~10Hz single amplitude 1.65mm
Shock Misoperation Min. 100m/s (111ms) Direction X, Y, Z contact ON/OFF
resistance total 36 times
Endurance Min. 1,000m/s (61ms) Direction X, Y, Z contact OFF
total 18 times
Dimensions / weight 10.0 x 29.0 x 12.5 mm / approx. 8.0g
Sealing Plastic sealed (-RW: Flux free)
*1: Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load
before production since reference values may vary according to switching frequencies, environmental conditions and
expected reliability levels.
2