Micro-D Accessories Stainless Steel Jackscrew Kits with C Clips 179-013-XX C Clip Jackscrew Kits offer an Corrosion-Resistant Steel The clip alternative to e-ring jackscrew kits. The is made from 17-7PH spring temper c clip fits over the flange and, unlike stainless steel. The jackscrew is made e-rings, cannot be dislodged in handling from 125 KPSI tensile strength stainless or use. steel, passivated. Order Two Kits Per Connector. Each kit Application Note: The magnetic consists of one jackscrew and one c clip. permeability of the c clip exceeds the 2.0 maximum of MIL-DTL-83513205 (5.2) REF .135 (3.4) REF .205 (5.21) .295 (7.5) .130 (3.3) .130 (3.3) 2-56 UNC 4-40 UNC SIZE 100 Figure 1 Figure 2 C Clip for Size 9 - 69 Pin Micro-D C Clip for Sizes 75-130 Micro-D Recommended Max. Weight In Part Number Jackscrew Type Thread Size Configuration Max.Torque Grams (2 Kits) 179-013-1S Slot Head 2-56 UNC Figure 1 2.5 inch-pounds 1.0 179-013-1H Hex head 2-56 UNC Figure 1 2.5 inch-pounds 1.0 179-013-2S Slot Head 4-40 UNC Figure 2 4.0 inch-pounds 1.5 179-013-2H Hex head 4-40 UNC Figure 2 4.0 inch-pounds 1.5 Replacement Hardware Kits for C Clip Micro-D Backshells Replacement Hardware Kits for Standard Corrosion-Resistant Steel The clip is made Series 50 Micro-D Backshells. from 17-7PH spring temper stainless steel. The jackscrew is made from 300 series stainless steel, Order Two Kits Per Connector. Each Jackscrew passivated. kit consists of one jackscrew and one clip. Jackpost Fillister Head Jackscrew Hex Head Jackscrew Extended Jackscrew N Part Number Part Number Thread Size Part Number Thread Size Overall Length Part Number Thread Size (dash = size) 687-152-01B 2-56 (9-69 pin) 687-152-01 2-56 (9-69 pin) 687-439-09 1.27 (32.3) 687-194 2-56 (9-69 pin) 687-152-02B 4-40 (75-130 pin) 687-152-02 4-40 (75-130 pin) 687-439-15 1.40 (35.6) 687-194-1 4-40 (75-130 pin) 687-439-21 1.52 (38.6) 687-439-25 1.58 (40.1) 687-439-31 1.64 (41.7) 687-439-37 1.68 (42.7) 687-439-51 1.71 (43.3) 687-439-100 1.81 (46.0) 2013 Glenair, Inc. High Performance Micro-D Connectors and Cables U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com N-12 E-Mail: sales glenair.com