311FS001M0802 Glenair

311 311-001 Lamp-Base Thread EMI/RFI Shrink Boot Adapter with Strain Relief and Optional Shrink Boot Rotatable Coupling - Low Profile CONNECTOR 311 F A 001 M 16 03 E T DESIGNATORS Product Series Shrink Boot (Table IV - Omit for none) A-F-H Connector Designator E = Strain Relief (Omit for nut) J-L-S Angle and Profile A = 90 ROTATABLE B = 45 Cable Entry (Table IV) S = Straight COUPLING Shell Size (Table I) Basic Part No. Finish (Table II) O-Ring 1.75 1.25 (31.8) (44.5) Max Max A Thread (Table I) J K Cable Cable C (Table I) (Table (Table Entry Entry IV) IV) STYLE 2 (STRAIGHT STYLE E See Note 5) STRAIN RELIEF G E A Thread (Table III) (Table III) (Table I) F (Table III) C C (Table I) (Table I) .88 (22.4) H Max (Table III) Cable Entry J (Table IV) Cable Entry STYLE 2 (45 & 90 J See Note 5) (Table IV) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 311 - Page 2311-001 Lamp-Base Thread EMI/RFI Shrink Boot Adapter with Strain Relief and Optional Shrink Boot Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: DIMENSIONS SHELL SIZE E F G H A-F-J-L-S H Max Max Max Max .500 (12.7) 08 09 .457 (11.6) 1.630 (41.4) 1.640 (41.7) 10 11 .520 (13.2) 1.690 (42.9) .595 (15.1) 1.760 (44.7) 12 13 .582 (14.8) 1.750 (44.5) .610 (15.5) 1.780 (45.2) 14 15 .645 (16.4) 1.840 (46.7) .700 (17.8) 1.850 (47.0) 16 17 .738 (18.7) 1.950 (49.5) .885 (22.5) 1.940 (49.3) .975 (24.8) 18 19 .926 (23.5) 2.140 (54.4) 2.110 (53.6) 20 21 .926 (23.5) 2.140 (54.4) .975 (24.8) 2.110 (53.6) 22 23 1.020 (25.9) 2.290 (58.2) 1.125 (28.6) 2.220 (56.4) 24 25 1.020 (25.9) 2.290 (58.2) 1.125 (28.6) 2.220 (56.4) 28 1.145 (29.1) 2.340 (59.4) 1.225 (31.1) 2.390 (60.7) 1.575 (40.0) 32 1.207 (30.7) 2.440 (62.0) 2.640 (67.1) 36 1.238 (31.4) 2.530 (64.3) 1.775 (45.1) 2.640 (67.1) TABLE IV: CABLE ENTRY AND SHRINK BOOT Dash J K Cable Entry Shrink No. Max Max Max Boot 01 .448 (11.4) .781 (19.8) .125 (3.2) n/a 02 .515 (13.1) .968 (24.6) .250 (6.4) 770-001S103 03 .640 (16.3) 1.046 (26.6) .375 (9.5) 770-001S103 04 .765 (19.4) 1.156 (29.4) .500 (12.7) 770-001S104 05 .920 (23.4) 1.219 (31.0) .625 (15.9) 770-001S104 06 1.015 (25.8) 1.343 (34.1) .750 (19.1) 770-001S105 07 1.140 (29.0) 1.469 (37.3) .875 (22.2) 770-001S106 08 1.265 (32.1) 1.594 (40.5) 1.000 (25.4) 770-001S106 09 1.432 (36.4) 1.719 (43.7) 1.125 (28.6) 770-001S107 10 1.515 (38.5) 1.844 (46.8) 1.250 (31.8) 770-001S107 11 1.640 (41.7) n/a 1.375 (34.9) 770-001S108 12 1.765 (44.8) n/a 1.500 (38.1) 770-001S108 13 2.015 (51.2) n/a 1.750 (44.5) 770-001S108 1. Cable Entry is defined as the accomodation range for the wire bundle TABLE II - STANDARD FINISHES or cable. Dimensions shown are not intended for inspection criteria. GLENAIR 2. See Shrink Boot Reference Information (page 40). SYMBOL FINISH B Cadmium Plate, Olive Drab 3. Metric dimensions (mm) are indicated in parentheses. M Electroless Nickel 4. O-Rings not supplied with Connector Designator A. NF Cadmium Plate, Olive Drab Over 5. When maximum entry (page 21) is exceeded, Style 2 will be supplied. Electroless Nickel Dimensions E, F, G & H will not apply. Please consult factory. See Inside Back Cover for Complete Finish Information and Additional Finish Options 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 311 - Page 3 311