370AS001NF1404A3 Glenair

37 370-001 Submersible Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling 370 F S 001 M 16 10 M 6 Product Series Length: S only CONNECTOR (1/2 inch increments: DESIGNATORS Connector e.g. 6 = 3 inches) Designator A-F-H-L-S Strain Relief Style Angle and Profile (H, A, M, D) ROTATABLE A = 90 B = 45 Cable Entry (Tables X, XI) COUPLING S = Straight Shell Size (Table I) Basic Part No. Finish (Table II) Length .060 (1.52) Minimum Order Length 2.0 Inch A Thread (See Note 5) Length .060 (1.52) (Table I) Minimum Order Length 1.5 Inch O-Ring (See Note 5) C Typ. (Table I) G (Table III) STYLE 2 E (STRAIGHT (Table III) See Note 1) .88 (22.4) Max F (Table III) H (Table III) Now Available with the NESTOR Glenairs Non-Detent, STYLE 2 Spring-Loaded, Self- (45 & 90 Locking Coupling. See Note 1) Add -445 to Specify This AS85049 Style N Coupling Interface. STYLE H STYLE A STYLE M STYLE D Heavy Duty Medium Duty Medium Duty Medium Duty (Table X) (Table XI) (Table XI) (Table XI) W T X .135 (3.4) Max Cable Cable Cable Cable Y V Y Z Range Range Range Entry 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 37 - Page 4370-001 Submersible Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling 1. When maximum cable entry TABLE III: ELBOW DIMENSIONS (page 21) is exceeded, Style 2 Shell Size E F G H will be supplied. Dimensions Conn. Desig. E, F, G and H will not apply. A-F-L-S H Max Max Max Max Please consult factory. 08 09 .457 (11.6) 1.810 (46.0) .500 (12.7) 1.820 (46.2) 11 2. Metric dimensions (mm) are 10 .520 (13.2) 1.869 (47.5) .595 (15.1) 1.940 (49.3) indicated in parentheses. 12 13 .582 (14.8) 1.929 (49.0) .610 (15.5) 1.960 (49.8) 14 15 .645 (16.4) 2.359 (59.9) .700 (17.8) 2.369 (60.2) 3. Cable range is defined as the accommodations range for 16 17 .738 (18.7) 2.469 (62.7) .885 (22.5) 2.459 (62.5) the wire bundle or cable. 18 19 .926 (23.5) 2.659 (67.5) .975 (24.8) 2.629 (66.8) 21 Dimensions shown are not 20 .926 (23.5) 2.659 (67.5) .975 (24.8) 2.629 (66.8) intended for inspection criteria. 22 23 1.020 (25.9) 2.872 (72.9) 1.125 (28.6) 2.802 (71.2) 24 25 1.020 (25.9) 2.872 (72.9) 1.125 (28.6) 2.802 (71.2) 4. Interface O-Ring not supplied with connector designator A. 28 1.145 (29.1) 2.905 (73.8) 1.225 (31.1) 2.955 (75.1) 5. Consult factory for shorter 32 1.207 (30.7) 3.005 (76.3) 1.575 (40.0) 3.205 (81.4) lengths on straight backshells. 36 1.238 (31.4) 3.315 (84.2) 1.775 (45.1) 3.255 (82.7) See inside back cover fold-out TABLE X: CABLE ENTRY or pages 13 and 14 for Dash T V Cable Range No. Max Max Min Max unabridged Tables I and II. 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 06 .780 (19.8) 1.145 (29.1) .250 (6.4) TABLE II: STANDARD FINISHES .437 (11.1) GLENAIR 08 .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) SYMBOL FINISH 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) B Cadmium Plate, Olive Drab 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) C Anodize, Black 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) G Hard Coat, Anodic M Electroless Nickel 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) NF Cadmium Plate, Olive Drab 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) Over Electroless Nickel 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) See Inside Back Cover 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) for Additional Finish Options TABLE XI: CABLE ENTRY Dash W X Y Z Cable Range No. Max Max Max Max Min ** Max 03* .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) .437 (11.1) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) .563 (14.3) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) 32* 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.437 (36.5) 1.875 (47.6) 1.187 (30.1) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.875 (47.6) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 37 - Page 5 37