380HA013NF0903A Glenair

38 380-013 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile 380 F S 013 M 16 10 A 6 CONNECTOR Length: S only Product Series DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator ROTATABLE Strain Relief Style (H, A, M, D) Angular Function COUPLING A = 90 Cable Entry (Table X, XI) B = 45 S = Straight Shell Size (Table I) TYPE D INDIVIDUAL OR OVERALL Finish (Table II) Basic Part No. SHIELD TERMINATION Length .060 (1.52) A Thread Length .060 (1.52) Minimum Order (Table I) Minimum Order Length 2.0 Inch Length 1.5 Inch (See Note 4) (See Note 4) C Typ. (Table I) E G STYLE 2 (Table III) (Table III) (STRAIGHT See Note 1) F (Table III) .88 (22.4) Max H (Table III) STYLE 2 (45 & 90 See Note 1) Add -445 to Specify Glenairs Non-Detent, NESTO) Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. STYLE H STYLE A STYLE M STYLE D Heavy Duty Medium Duty Medium Duty Medium Duty (Table X) (Table XI) (Table XI) (Table XI) T W .135 (3.4) X Max Cable Cable Cable Cable Y V Y Z Range Range Range Entry 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 70380-013 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile TABLE III: ELBOW DIMENSIONS See inside back cover Shell Size E F G H Conn. Desig. fold-out or pages 13 and Max A-F-L-S H Max Max Max 14 for unabridged 08 09 .457 (11.6) 1.730 (43.9) .560 (14.2) 1.680 (42.7) Tables I and II. 10 11 .520 (13.2) 1.730 (43.9) .660 (16.8) 1.800 (45.7) 12 13 .582 (14.8) 1.790 (45.5) .670 (17.0) 1.820 (46.2) 14 15 .645 (16.4) 1.880 (47.8) .760 (19.3) 1.890 (48.0) 1.980 (50.3) 16 17 .738 (18.7) 1.990 (50.5) .950 (24.1) TABLE II: STANDARD FINISHES 18 19 .926 (23.5) 2.180 (55.4) 1.030 (26.2) 2.150 (54.6) GLENAIR 20 21 .926 (23.5) 2.180 (55.4) 1.030 (26.2) 2.150 (54.6) SYMBOL FINISH B Cadmium Plate, Olive Drab 22 23 1.020 (25.9) 2.330 (59.2) 1.180 (30.0) 2.260 (57.4) M Electroless Nickel 24 25 1.020 (25.9) 2.330 (59.2) 1.180 (30.0) 2.260 (57.4) NF Cadmium Plate, Olive Drab 2.430 (61.7) 28 1.145 (29.1) 2.380 (60.5) 1.280 (32.5) Over Electroless Nickel 32 1.207 (30.7) 2.480 (63.0) 1.630 (41.4) 2.680 (68.1) See Inside Back Cover for Additional Finish Options 36 1.238 (31.4) 2.570 (65.3) 1.830 (46.5) 2.680 (68.1) TABLE X: CABLE ENTRY 1. When maximum cable entry (page 21) Dash T V Cable Range is exceeded, Style 2 will be supplied. No. Max Max Min Max Dimensions E, F, G and H will not 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) apply. Please consult factory. 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) 2. Metric dimensions (mm) are indicated in 08 .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) parentheses. 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 3. Cable range is defined as the accom- 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) modations range for the wire bundle or 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) cable. Dimensions shown are not 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) intended for inspection criteria. 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 4. Consult factory for shorter lengths on 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) straight backshells. 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W X Y Z Cable Range No. Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 38 - Page 71 38