38
380-018
EMI/RFI Non-Environmental Backshell
with Strain Relief
Type E - Rotatable Coupling - Low Profile
380 F S 018 M 24 12 D A 6
CONNECTOR
Product Series Length: S only
DESIGNATORS (1/2 inch increments:
Connector e.g. 6 = 3 inches)
A-F-H-L-S Designator
Strain Relief Style
ROTATABLE
Angle and Profile (H, A, M, D)
A = 90
COUPLING
B = 45 Termination (Note 5)
S = Straight D = 2 Rings
TYPE E INDIVIDUAL T = 3 Rings
Basic Part No.
AND/OR OVERALL
Cable Entry (Table X, XI)
SHIELD TERMINATION
Finish (Table II)
Shell Size (Table I)
Length .060 (1.52)
Length .060 (1.52)
Minimum Order Length 2.0 Inch A Thread
Minimum Order
(See Note 4)
(Table I)
Length 1.5 Inch
(See Note 4)
C Typ.
(Table I)
E
(Table III)
G
STYLE 2
(Table III)
(STRAIGHT
F (Table III)
See Note 1)
.88 (22.4)
Max
H (Table III)
Now Available
with the NESTOR
Glenairs Non-Detent, Spring-
STYLE 2
Loaded, Self- Locking Coupling.
(45 & 90
Add -445 to Specify This
See Note 1)
AS85049 Style N Coupling
Interface.
STYLE H
STYLE A
STYLE M STYLE D
Heavy Duty Medium Duty
Medium Duty Medium Duty
(Table X)
(Table XI) (Table XI) (Table XI)
T W .135 (3.4)
X
Max
Cable
Cable Cable
Cable
Y
V Y Z
Range
Range Range
Entry
2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
Series 38 - Page 84380-018
EMI/RFI Non-Environmental Backshell
with Strain Relief
Type E - Rotatable Coupling - Low Profile
See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II.
TABLE III: ELBOW DIMENSIONS
Shell Size
E F G H
Conn. Desig.
A-F-L-S Max Max Max
H Max
08 09 .520 (13.2) 1.680 (47.2) .477 (12.7) 1.730 (43.9)
10 11 .615 (15.6) 1.800 (45.7) .540 (13.7) 1.730 (43.9)
TABLE II: STANDARD FINISHES
12 .630 (16.0) 1.820 (46.2) .602 (15.3)
13 1.790 (45.5)
GLENAIR
SYMBOL FINISH
14 15 .720 (18.3) 1.890 (48.0) .665 (19.6) 1.880 (47.8)
B Cadmium Plate, Olive Drab
16 .905 (23.0) 1.980 (50.3) .758 (19.2)
17 1.990 (50.5)
M Electroless Nickel
18 19 .995 (25.3) 2.150 (54.6) .946 (24.0) 2.180 (55.4)
NF Cadmium Plate, Olive Drab
20 21 .995 (25.3) 2.150 (54.6) .946 (24.0) 2.180 (55.4)
Over Electroless Nickel
22 1.145 (29.1) 2.260 (57.4) 1.040 (26.4)
23 2.330 (59.2) See Inside Back Cover
for Additional Finish Options
24 25 1.145 (29.1) 2.260 (57.4) 1.040 (26.4) 2.330 (59.2)
1. When maximum cable entry (page 21) is
exceeded, Style 2 will be supplied.
TABLE X: CABLE ENTRY
Dimensions E, F, G and H will not apply.
Dash T V Cable Range
Please consult factory.
No. Max Max Min Max
2. Metric dimensions (mm) are indicated in
04 .780 (19.8) .957 (24.3) .125 (3.2)
.312 (7.9)
parentheses.
06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1)
3. Cable range is defined as the accommo-
08 .780 (19.8) 1.332 (33.8) .312 (7.9)
.562 (14.3)
dations range for the wire bundle or
10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9)
cable. Dimensions shown are not
12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1)
intended for inspection criteria.
16 .905 (23.0) 1.770 (45.0) .625 (15.9)
.937 (23.8)
4. Consult factory for shorter lengths on
20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8)
straight backshells.
24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4)
1.375 (34.9)
5. Designate Symbol T for 3 ring termina-
28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3)
tion of individual and overall braid.
32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6)
Designate D for standard 2 ring termina-
tion of individual or overall braid.
TABLE XI: CABLE ENTRY
Dash W X Y Z
Cable Range
No. Max Max Max Max Min ** Max
03*
.437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4)
04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9)
06*
.500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1)
08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3)
10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9)
12
.563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1)
16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8)
20
.656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8)
24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9)
28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3)
32*
1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6)
40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3)
* Not available in Style M clamp. ** Not Applicable Style D
2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
Series 38 - Page 85
38