390HA001NF1506H Glenair

39 390-001 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Low Profile 390 F S 001 M 16 10 M 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Strain Relief Style ROTATABLE Angle and Profile (H, A, M, D) COUPLING A = 90 B = 45 Cable Entry (Tables X, XI) S = Straight TYPE A OVERALL Shell Size (Table I) SHIELD TERMINATION Basic Part No. Finish (Table II) A Thread (Table I) Length * 1.125 (28.6) Length .060 (1.52) Approx. Minimum Order Length 2.0 Inch * Length O-Rings (See Note 4) .060 (1.52) Minimum Order C Typ. (Table I) Length 1.5 Inch (See Note 4) G E (Table III) (Table III) STYLE 2 (STRAIGHT F (Table III) See Note 1) .88 (22.4) H Max (Table III) Now Available with the NESTOR Glenairs Non-Detent, Spring-Loaded, Self- STYLE 2 Locking Coupling. (45 & 90 Add -445 to Specify See Note 1) This AS85049 Style N Coupling Interface. STYLE H STYLE A STYLE M STYLE D Heavy Duty Medium Duty Medium Duty Medium Duty (Table X) (Table XI) (Table XI) (Table XI) T W X .135 (3.4) Max Cable Cable Cable Cable Y V Y Z Range Range Range Entry 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC.  1211 AIR WAY  GLENDALE, CA 91201-2497  818-247-6000  FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 12390-001 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type A - Rotatable Coupling - Low Profile TABLE III: ELBOW DIMENSIONS 1. When maximum cable entry (page 21) is exceeded, Style Shell Size E F G H 2 will be supplied. Dimen- Conn. Desig. A-F-L-S H Max Max Max Max sions E, F, G and H will not 08 09 .457 (11.6) 1.760 (44.7) .500 (12.7) 1.880 (47.8) apply. Please consult factory. 10 11 .520 (13.2) 1.920 (48.8) .595 (15.1) 1.990 (50.5) 2. Metric dimensions (mm) are 12 13 .582 (14.8) 1.990 (50.5) .610 (15.5) 2.020 (51.3) indicated in parentheses. 14 15 .645 (16.4) 2.144 (54.5) .700 (17.8) 2.154 (54.7) 3. Cable range is defined as the 16 17 .738 (18.7) 2.254 (57.3) .885 (22.5) 2.244 (57.0) accommodations range for 18 19 .926 (23.5) 2.444 (62.1) .975 (24.8) 2.414 (61.3) the wire bundle or cable. 20 21 .926 (23.5) 2.444 (62.1) .975 (24.8) 2.414 (61.3) Dimensions shown are not 22 23 1.020 (25.9) 2.657 (67.5) 1.125 (28.6) 2.587 (65.7) intended for inspection 24 25 1.020 (25.9) 2.657 (67.5) 1.125 (28.6) 2.587 (65.7) criteria. 28 1.145 (29.1) 2.690 (68.3) 1.225 (31.1) 2.740 (69.6) 4. Consult factory for shorter 32 1.207 (30.7) 2.790 (70.9) 1.575 (40.0) 2.990 (75.9) lengths on straight backshells. 36 1.238 (31.4) 2.930 (74.4) 1.775 (45.1) 3.040 (77.2) 5. Interface O-Ring not supplied with connector designator A. TABLE X: CABLE ENTRY Dash T V Cable Range No. Max Max Min Max 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) See inside back cover 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) 08 .780 (19.8) 1.332 (33.8) .387 (9.8) fold-out or pages 13 and .562 (14.3) 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 14 for Tables I and II. 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W X Y Z Cable Range No. Max Max Max Max Min Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.437 (36.5) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.875 (47.6) 2.375 (60.3) * Not available in Style M clamp. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC.  1211 AIR WAY  GLENDALE, CA 91201-2497  818-247-6000  FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 39 - Page 13 39