460 460-002 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Direct Coupling - Low Profile and Split 90 460 F S 002 M 16 05 F 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: * Connector Designator e.g. 6 = 3 inches) A-B -C-D-E-F Strain Relief Style (F, G) Angle and Profile G-H-J-K-L-S A = 90 Solid B = 45 Cable Entry (Tables IV, V) * Conn. Desig. B See Note 7 D = 90 Split DIRECT COUPLING S = Straight Shell Size (Table I) Basic Part No. Finish (Table II) Length * .690 (17.5) Max Length .060 (1.52) A Thread Min. Order Length 2.0 Inch (Table I) (See Note 5) B Cable M Range (Table IV) (Table I) STYLE 2 * Length .060 (1.52) (STRAIGHT Shown with Style F Minimum Order Length 1.5 Inch See Note 1) (See Note 5) Strain Relief J G J E (Table V) (Table III) (Table III) (Table V) B B (Table I) (Table I) F (Table V) 90 SPLIT H Shown with (Table V) .880 (22.4) Max J K Style G (Table III) (Table V) Strain Relief Cable Range .416 (10.6) L (Table V) (Note 6) B Max 90 SOLID (Table I) N Shown with Style F (Table IV) Strain Relief 469-001-XX Shield Support Ring (order separately) is recommended Shown with Style F Strain Relief for use in all G-Spring backshells (see page 463-8) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 460 - Page 6460-002 EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief Direct Coupling - Low Profile and Split 90 See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: FRONT ADAPTER TABLE IV: CABLE ENTRY J Max - Conn. Designator Dash M N Cable Range Shell A-E-F Max No. Max Max Min Size J-H-L-S D-B-G-K C .250 (6.4) 01 .843 (21.4) .625 (15.9) .156 (4.0) 08/09 1.180(30.0) 1.440(36.6) .375 (9.5) 02 .968 (24.6) .750 (19.1) .188 (4.8) 10/11 1.180(30.0) 1.440(36.6) 03 1.046 (26.6) .875 (22.2) .250 (6.4) .438 (11.1) 12/13 1.180(30.0) 1.440(36.6) 1.735(44.1) .500 (12.7) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) 14/15 1.180(30.0) 1.440(36.6) 1.915(48.6) .625 (15.9) 05 1.218 (30.9) 1.125 (28.6) .375 (9.5) 16/17 1.380(35.0) 1.560(39.6) 1.915(48.6) .750 (19.1) 06 1.343 (34.1) 1.250 (31.8) .500 (12.7) 18/19 1.380(35.0) 1.560(39.6) 1.915(48.6) .875 (22.2) 07 1.468 (37.3) 1.375 (34.9) .625 (15.9) 20/21 1.380(35.0) 1.560(39.6) 1.915(48.6) 08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 1.000 (25.4) 22/23 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.125 (28.6) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 24/25 1.380(35.0) 1.560(39.6) 1.915(48.6) 1.250 (31.8) 10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) 28/29 1.610 (40.9) 1.560(39.6) 1.915(48.6) 1.375 (34.9) 11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 32/33 1.610(40.9) 1.750(44.5) 1.915(48.6) 1.500 (38.1) 12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) 36 1.610(40.9) 1.750(44.5) 1.915(48.6) 13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 1.625 (41.3) 40 1.610(40.9) 2.190(55.6) 1.915(48.6) 1.750 (44.5) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) * Consult factory for availability TABLE V: DIMENSIONS Dash E F G H K L No. Max Max Max Max Max Max 01 .680 (17.3) .560 (14.2) .636 (16.2) 1.670 (42.4) .630 (16.0) 1.720 (43.7) 02 .750 (19.1) .620 (15.7) .710 (18.0) 1.790 (45.5) .630 (16.0) 1.720 (43.7) .810 (20.6) .690 (17.5) .734 (18.6) 1.810 (46.0) .692 (17.6) 1.780 (45.2) 03 04 .870 (22.1) .720 (18.3) .825 (21.0) 1.880 (47.8) .755 (19.2) 1.870 (47.5) 05 .930 (23.6) .820 (20.8) .988 (25.1) 1.970 (50.0) .848 (21.5) 1.980 (50.3) 06 1.000 (25.4) .880 (22.4) 1.087 (27.6) 2.140 (54.4) 1.036 (26.3) 2.170 (55.1) 07 1.060 (26.9) .940 (23.9) 1.087 (27.6) 2.140 (54.4) 1.036 (26.3) 2.170 (55.1) 1.120 (28.4) 1.000 (25.4) 1.325 (33.7) 2.250 (57.2) 1.130 (28.7) 2.320 (58.9) 08 09 1.180 (30.0) 1.060 (26.9) 1.325 (33.7) 2.250 (57.2) 1.130 (28.7) 2.320 (58.9) 10 1.180 (30.0) 1.060 (26.9) 1.337 (34.0) 2.420 (61.5) 1.255 (31.9) 2.370 (60.2) 11 1.312 (33.3) 1.219 (31.0) 1.827 (46.4) 2.670 (67.8) 1.317 (33.5) 2.470 (62.7) 12 1.562 (39.7) 1.438 (36.5) 1.827 (46.4) 2.670 (67.8) 1.317 (33.5) 2.470 (62.7) 1.562 (39.7) 1.438 (36.5) 2.027 (51.5) 2.670 (67.8) 1.348 (34.2) 2.560 (65.0) 13 14 1.688 (42.9) 1.656 (42.1) 2.027 (51.5) 2.670 (67.8) 1.348 (34.2) 2.560 (65.0) 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. Angular Function S only. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. Maximum cable entry available for split elbow is 1.188 (30.2). 7. When using Connector Designator B refer to pages 18 and 19 for part number development. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 460 - Page 7 460