712AS277NF1416-31

Series 74 Helical Tubing 712-277 Heavy-Duty Ground Ring System Backshell with Ground Ring Shield Termination for Series 74 Helical Convoluted Tubing Heavy-Duty convoluted tubing-to-connector backshell, environmental, for tubing with one or two braids and jacket How To Order Angle: S = Straight Finish Dash No. Product K = 45 Series L = 90 (Table II) (Table IV) Style 1 or 2 712 F S 277 M 16 20 -61 Connector Designator Basic No. Shell Size Length in 1/2 inch C increments (Example: A, D, F, H, L, or S (Table III) 6 = 3.0 inches (Table I) Length .060 (1.52) 1.03 (Ref) O-Ring - Typ Typ A Thread Typ (Table I - Intro) G Conduit J C Typ I.D. (Ref) Typ (Table I - Intro) Typ H Wrench Flats, Typ SYM S Straight Material/Finish Adapters, elbows, coupling nuts, nuts, and ferrules: See Table II O-Rings: Silicone/N.A. Notes and Specifi cations SYM L When tubing I.D. max exceeds inside diameter of connector shell, style 2 may be supplied. 90 Refer to Intro, pages A-32 A-33. O-Ring not supplied with connector designator A Standard minimum length for Style I is 1.50 inch, for Style II is 2.00 inches. Consult factory for shorter length. Note: applies to Symbol S, Straight, only. 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: C-44 sales glenair.com712-277 Heavy-Duty Ground Ring System Backshell with Ground Ring Shield Termination for Series 74 Helical Convoluted Tubing Table III: Shell Size/Dimensions LENGTH Shell Size .060 E F G H (1.52) A, D, F, Max Max Max Max H L, S 08 09 .64 (16.3) 1.23 (31.2) .75 (19.1) 1.34 (34.0) 10 11 .66 (16.8) 1.26 (32.0) .81 (20.6) 1.40 (35.6) 12 13 .69 (17.6) 1.28 (32.5) .87 (22.1) 1.46 (37.1) 14 15 .71 (18.0) 1.31 (33.3) .92 (23.4) 1.53 (38.9) 16 17 .73 (18.5) 1.33 (33.8) .98 (24.9) 1.59 (40.4) 18 19 .75 (19.1) 1.34 (34.0) 1.02 (25.9) 1.61 (40.9) STYLE 2 20 21 .77 (19.6) 1.36 (34.5) 1.08 (27.4) 1.67 (42.4) (STRAIGHT) 22 23 .80 (20.3) 1.40 (35.6) 1.14 (29.0) 1.75 (44.5) 24 25 .82 (20.8) 1.43 (36.3) 1.20 (30.5) 1.82 (46.2) 28 1.04 (26.4) 1.60 (40.6) 1.48 (37.6) 2.06 (52.3) 32 1.09 (27.7) 1.64 (41.7) 1.61 (40.9) 2.15 (54.6) .88 (22.4) 36 1.14 (29.0) 1.69 (42.9) 1.72 (43.7) 2.26 (57.4) C MAX Table II: Finish Sym Material Finish Description B Olive Drab over Cadmium Plate J Gold Iridite over Cadmiup Plate over Nickel STYLE 2 M Electroless Nickel (45 & 90) N Olive Drab over Cadmium Plate over Nickel AL Alloy NC Zinc-Cobalt, Olive Drab Olive Drab over Cadmium Plate over NF Electroless Nickel (500 Hour Salt Spray) E T Bright Dip Cadmium Plate over Nickel 45 Z1 300 Series SST Passivate F Table IV: Dash No./Dimensions Conduit I.D. Dash No. J Max Min Max 06 .181 (4.6) .188 (4.8) 1.09 (27.7) 09 .273 (6.9) .281 (7.1) 1.16 (29.5) 10 .306 (7.8) .312 (7.9) 1.22 (31.0) 12 .359 (9.1) .375 (9.5) 1.28 (32.5) SYM K 14 .427 (10.8) .437 (11.1) 1.34 (34.0) 45 16 .480 (12.2) .500 (12.7) 1.41 (35.8) 20 .603 (15.3) .625 (15.9) 1.53 (38.9) 24 .725 (18.4) .750 (19.1) 1.66 (42.2) 28 .860 (21.8) .875 (22.2) 1.78 (45.2) 32 .970 (24.6) 1.000 (25.4) 1.91 (48.5) 40 1.205 (30.6) 1.250 (31.8) 2.28 (57.9) 48 1.437 (36.5) 1.500 (38.1) 2.59 (65.8) 56 1.688 (42.9) 1.750 (44.5) 2.91 (73.9) 64 1.937 (49.2) 2.000 (50.8) 3.03 (77.0) 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: C-45 sales glenair.com Series 74 Helical Tubing