712S380NF1616-3F Glenair

Series 74 Helical Tubing 712-380 Heavy-Duty Ground Ring System Conduit to Transition or End Fitting Adapter with Ground Ring Shield Termination for Series 74 Helical Convoluted Tubing Heavy-Duty convoluted tubing to transition or end-fi tting adapter How To Order Length in 1/2 inch (12.7) increments Thread (Example: 6 = 3.0 inches (76.2) Dash No. Product Minimum Length: 1.50 (38.1) Series Basic No. (Table III) 712 S 380 M 16 16 -3C Finish Angular Function Dash No. Conduit Type (Table II) S = Straight (Table IV) C, D, E, F or G C (Table V) Length 1.03 O-Ring .060 (1.52) (Ref) A Thread - Typ B D C Conduit E Typ Max Max Typ I.D. Types C & F Environmental Wrench Flats Intermateability Guide For use with Y transitions 710-106, 710-107, 710-370, T transitions 710-108, 710-109, 710-371 Connector adapters 713-100, 713-101, 713-110 Bulkhead adapters 710-100, 710-101, 710-372 Bulkhead feed-thrus 710-102, 710-103, 710-373 Male Pipe thread adapters 710-114, 710-115, 710-405 Female pipe thread adapters 710-116, 710-117, 710-406 Material/Finish Adapters, coupling nuts, nuts, and ferrules: See Table II O-Rings: Silicone/N.A. 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: C-48 sales glenair.com712-380 Heavy-Duty Ground Ring System Conduit to Transition or End Fitting Adapter with Ground Ring Shield Termination for Series 74 Helical Convoluted Tubing Table III: Dash No./Dimensions Length Thread A Thread B Max Dash No. C Dash No. Class 2B Table IV Max 06 7/16 - 28 UNEF .640 (16.3) .188 (4.8) 06 09 9/16 - 24 UNEF .690 (17.5) .281 (7.1) 09 10 9/16 - 24 UNEF .690 (17.5) .312 (7.9) 10 D 12 5/8 - 24 UNEF .760 (19.3) .375 (9.5) 12 Ref 14 11/16 UNEF .890 (22.6) .438 (11.1) 14 16 3/4 - 20 UNEF .890 (22.6) .500 (12.7) 16 20 7/8 - 20 UNEF 1.024 (26.0) .625 (15.9) 20 24 1 - 20 UNEF 1.152 (29.3) .750 (19.1) 24 Types D & E 28 1 3/16 - 18 UNEF 1.363 (34.6) 1.000 (25.4) 28 Non-Environmental 32 1 15/16 - 18 UNEF 1.488 (37.8) 1.250 (31.8) 32 40 1 1/2 - 18 UNEF 1.676 (42.6) 2.500 (63.5) 40 48 1 3/4 - 18 UNS 1.960 (49.8) 1.500 (38.1) 48 56 2 - 18 UNS 2.210 (56.1) 1.750 (44.5) 56 C Length 64 2 1/4 - 16 UN 2.460 (62.5) 2.000 (50.8) 64 Table IV: Dash No./Dimensions E Ref Conduit I.D. Dash D E No. Max Max Min Max 06 .181 (4.6) .188 (4.8) 1.09 (27.7) .780 (19.8) 09 .273 (6.9) .281 (7.1) 1.16 (29.5) 1.03 (26.2) 10 .306 (7.8) .312 (7.9) 1.22 (31.0) 1.03 (26.2) Type G 12 .359 (9.1) .375 (9.5) 1.28 (32.5) 1.03 (26.2) Environmental 14 .427 (10.8) .437 (11.1) 1.34 (34.0) 1.22 (31.0) 16 .480 (12.2) .500 (12.7) 1.41 (35.8) 1.28 (32.5) 20 .603 (15.3) .625 (15.9) 1.53 (38.9) 1.41 (35.8) 24 .725 (18.4) .750 (19.1) 1.66 (42.2) 1.53 (38.9) 28 .860 (21.8) .875 (22.2) 1.78 (45.2) 1.71 (43.3) 32 .970 (24.6) 1.000 (25.4) 1.91 (48.5) 1.84 (46.7) 40 1.205 (30.6) 1.250 (31.8) 2.28 (57.9) 2.16 (54.9) 48 1.437 (36.5) 1.500 (38.1) 2.59 (65.8) 2.46 (62.5) 56 1.688 (42.9) 1.750 (44.5) 2.91 (73.9) 2.78 (70.6) 64 1.937 (49.2) 2.000 (50.8) 3.03 (77.0) 3.03 (77.0) Table II: Finish Sym Material Finish Description B Olive Drab over Cadmium Plate J Gold Iridite over Cadmiup Plate over Nickel Table V: Conduit Type M Electroless Nickel Conduit Part Confi guration Type Number N Olive Drab over Cadmium Plate over Nickel AL Alloy C 121-100 Tubing with braided shield and jacket NC Zinc-Cobalt, Olive Drab D 121-101 Tubing with braided shield Olive Drab over Cadmium Plate over NF Electroless Nickel (500 Hour Salt Spray) E 121-102 Tubing with two braided shields T Bright Dip Cadmium Plate over Nickel F 121-103 Tubing with two braided shields and jacket Z1 300 Series SST Passivate G 123-100 Tubing with jacket 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: C-49 sales glenair.com Series 74 Helical Tubing