770-007S103W1 Glenair

SERIES 77 Lipped, Straight Shrink Boots 770-007S High Ratio Boot How to Order Lipped, hi-ratio straight heat shrink boots provide mechanical and environmental protection from damage and debris . Hi-ratio boots are an ideal solution where the connector/backshell is significantly larger than the cable being used . Boots are available in eight material options with five adhesive choices . Glenair straight boots fit most standard boot adapters for circular connectors . All adhesive lined and unlined shrink books are RoHS compliant . Shrink boots are water-tight when equipped with factory installed or user-installed adhesive . Lipped boots lock into boot groove located on adapter and can be ordered with potting holes or drain holes according to your requirements Choose boot siz . e based on adapter diameter and cable diameter . How to Order C Sample Part Number 770 -007 S 1 03 W1 -DH Product Series 770 = Series 77 shrink boot Basic Number 007 = high ratio lipped boot Angular Function S = straight Material See material and adhesives table Boot Size 03, 04, 06, 07 see dimensions table Adhesive Lined Omit for no adhesive see material and adhesives table Drain Holes or Potting Ports DH = drain hole PP = injections-vent port Omit for none Material and Adhesive Compatibility Hot Melt Adhesives High Performance Epoxy Adhesives Material Description W1 W2 W3 (TACOM approved) R U (Compound No.) High Temperature Standard Elastomeric Pre-Coat Two-Part -55C to 125C -55C to 70C -55C to 125C -75C to 150C -75C to 155C 1 High-Performance Semi-Rigid Elastomer (2025) Type U epoxy 2 Zero Halogen Semi-Rigid Polyolefin (2010) adhesive is 3 General Purpose Flexible Polyolefin (2040) compatible with all boot materials . 5 Viton Fluoroelastomer Blend (2050) Ordered separately, 6 High Performance Elastomer Alloy (2051) user-installed 7 Semi-Rigid Polyolefin (2071) (779-001) Or . der boot with no 8 Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive U . se Type U two-part epoxy adhesive lining . 9 Low Temp Flexible Polyolefin (2013) NOTES 1 . See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material . C-16 2017 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 Dimensions in Inches (millimeters) are subject to change without notice. Straight Boots Material CodeStraight Boots SERIES 77 Lipped, Straight Shrink Boots 770-007S High Ratio Boot Dimensions Lipped Straight Adapter Shrink Boots, Standard: Dimensions P0 S Ae Ce Ar Cr A C STRAIGHT - AS SUPPLIED STRAIGHT - RECOVERED C Dimensions AS85049/140 Boot Glenair US Part S AS85049/141 Ae Dia. Min Ce Dia. Min Ar Dia Max Cr Dia. Max PO 10% Size Marking Ref Ref * 03 S03 19 760 (19 . 3) . 252 (6 . 4) 512 (130) . 083 (2 1) 2 .370 (60 .2) .461 (117) . 04 S04 20 1 .031 (26 .2) .299 (76) 752 (19 .1) .102 (2 .6) 2 .921 (74 .2) 480 (12 . 2) . 06 S06 21 1 .350 (34 .3) 382 (9 . 7) . 1 .024 (26 .0) .122 (3 .1) 3 .319 (84 .3) .480 (12 .2) 07 S07 22 1720 (43 7) .449 (114) . 1343 (34 1) .142 (3 .6) 3921 (99 6) 480 (12 . 2) . For materials Type 2, Type 3 and Type 9, dimension Ce is nominal *See GS85049/140 for mil qualified straight shrink boot Lipped Straight Shrink Boots: Part Marking, Raised Lettering EXPANDED RECOVERED BOOT SIZE CODE LETTER S INDICATES STRAIGHT BOOT LETTER A INDICATES ADAPTER (CONNECTOR) END LETTER C INDICATES CABLE END 2017 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com Series 77 Full Nelson Shrink Boot Catalog C-17 U.S. CAGE code 06324 Dimensions in Inches (millimeters) are subject to change without notice.