800-011-07M7-10PZ Glenair

Series 800 Series 800 Mighty Mouse, UN Mating Thread Receptacle with Rear Release Crimp Contacts 800-010 and 800-011 Ordering Information Series 800 Receptacle Connectors feature machined aluminum or stainless steel shells. Supplied with crimp removable contacts. Terminate contacts with standard M22520 tools. Fluorosilicone interfacial seal and rear grommet protect connector from water ingress. Terminate cable shield directly to 800-010 connector body with Band-Master ATS band, or choose 800-011 with accessory thread to attach optional cable clamp or backshell. Rear Panel Mount Jam-Nut How To Order Sample Part Number 800-011 -01 M 6-7 P N 800-010 = With Banding Platform Series (See Table I) 800-011 = With Accessory Thread -01 = Cable Receptacle C Shell Style (See Table II) -02 = Square Flange, Front or Rear Panel Mount -07 = Jam-Nut, Rear Panel Mount C = Aluminum / Black Anodize (Non-Conductive) M = Aluminum / Electroless Nickel NF = Aluminum / Cadmium with Olive Drab Chromate Shell Material and Finish ZNU = Aluminum / Zinc-Nickel with Black Chromate MT = Aluminum / Nickel-PTFE Z1 = Stainless Steel / Passivated Shell Size - Insert Arrangement See Contact Arrangements page C-2 Connector supplied Connector supplied Connector supplied with crimp contacts without contacts with 30 AWG crimp contacts P = Pin A = Pin Connector G = Pin Contact Type S = Socket B = Socket Connector H = Socket Signal and/or power contacts are not installed. Coaxial contacts and non-standard signal contacts are ordered separately. Polarization (See Table III) N = Normal X = Pos. X Y = Pos. Y Z = Pos. Z 6, 7 Table I: Series Table III: Keyway Positions Shell Size 5 and 6 Shell Size 7 thru 12 NORMAL 60 X Y 800-010 800-011 Z Receptacle with Band Platform Receptacle with Accessory Thread Z Y X 60 NORMAL Table II: Shell Style Key Position Key Rotation N Normal 150 X 140 Y 130 Z 120 -01 -02 -07 In-Line Square Flange, Rear Mount Jam-Nut, Rear Panel Mount Dimensions in Inches (millimeters) are subject to change without notice. 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com C-10 E-Mail: sales glenair.com Rev. 08/17/20Series 800 Mighty Mouse Receptacle with Rear Release Crimp Contacts 800-010-01 and 800-011-01 Dimensions In-line cable receptacle - shell style 01 5 5 Shell Size 5 & 6: .150 (3.81) MAX Shell Size 5 & 6: .150 (3.81) MAX 5 5 Shell Size 7 & 12: .100 (2.54) MAX Shell Size 7 & 12: .100 (2.54) MAX A FLATS D MAX F MAX C THREAD G THREAD C THREAD B E .320 (8.1) SHELL SIZE 5 & 6 C .460 (11.7) SHELL SIZE 7 THRU 12 .039 (.10) SHELL SIZE 5 & 6 .050 (1.27) SHELL SIZE 7 THRU 12 Accessory Thread Integral Band Platform 800-011-01 800-010-01 Dimensions C Threads G Threads Shell Size A Flats B D Max. E F Max. Mating Accessory 5 .312 (7.92) .355 (9.02) .3125-28 UN-2A .750 (19.05) .230 (5.84) .725 (18.42) .250-32 UNEF-2A 6 .375 (9.52) .400 (10.16) .3750-28 UN-2A .750 (19.05) .286 (7.26) .725 (18.42) .3125-32 UNEF-2A 7 .445 (11.30) .490 (12.45) .4375-28 UNEF-2A .825 (20.96) .390 (9.91) .800 (20.32) .4375-28 UNEF-2A 8 .550 (13.97) .600 (15.24) .5000-32 UN-2A .825 (20.96) .445 (11.30) .800 (20.32) .5000-28 UNEF-2A 9 .613 (15.57) .663 (16.84) .5625-32 UN-2A .825 (20.96) .500 (12.70) .800 (20.32) .5625-24 UNEF-2A 10 .675 (17.15) .725 (18.42) .6250-32 UN-2A .825 (20.96) .565 (14.35) .800 (20.32) .6250-24 UNEF-2A 12 .800 (20.32) .850 (21.59) .7500-28 UN-2A .825 (20.96) .650 (16.51) .800 (20.32) .6875-24 UNEF-2A Material / finish: NOTES Shell: Aluminum Alloy or 1. Contacts are size 23 crimp type, and used in 5. Grommet protrudes for power/combo CRES / see How to Order a rear release retention system arrangements Table 2. Additional insert arrangements available, 6. Shell sizes 5 thru 6 and insert arrangement Insulator: LCP or epoxy consult factory 8-13: master key is located at top dead Interfacial seal, grommet center (TDC) for normal (N) position. 3. Crimp barrel accommodates 22, 24 , 26 and seal: fluorosilicone or 28 gage wire 7. Shell size 7 thru 12: master key is rotated 90 silicone from TDC for normal position 4. Crimp tool data: Contact: copper alloy / gold Crimp frame: M22520/2-01 plate per ASTM B 488, Type Positioner for use with crimp frame: Glenair II, Class 1.25, over a suitable P/N 809-005 underplate Insertion/extraction tool: Glenair P/N 809- 008 Dimensions in Inches (millimeters) are subject to change without notice. 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com C-11 E-Mail: sales glenair.com Rev. 06/05/19 Series 800