M85049/115S15TW05-6 Glenair

AS85049 AS85049/115 Straight RFI/EMI Shield-Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut CONNECTOR DESIGNATOR: Product Series and Shell Size Shield Finish Entry Size Drain Hole (Table I) (Table IV) (Table II) (Omit for None) Basic Part Number MIL-DTL-38999 Series III and IV H EN3645 M85049/115 S 11 T W 03 - 6 D B Braid Length S = Detented, Self-Locking Finish 1 Inch Increments, = Non-Self-Locking (Use Dash) (Table III) 6 Min., 18 Max N = Non-Detented, Self-Locking Drain Holes (See Note 6) O-Ring 1.32 (33.5) Max (See Note 6) Length A Thread .50 (12.7) Z B W Y Knurl Style Mfr Option - Typ Single Layer Shield Wire Holes Termination Band (See Note 3) (See Note 5) Coupling Nut .075 (1.9) Ref Adapter Body .140 (3.56) .130 (3.30) Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-122 E-Mail: sales@glenair.comAS85049/115 Straight RFI/EMI Shield-Sock Shrink Boot Adapter with Optional Self-Locking Coupling Nut TABLE I: Shell Size TABLE II: Entry Size and Dimensions and Dimensions Y Allowable Entry W Z Shell A Thread B Max +.008 (.20) Cable Size .020 (.51) Max Size Class 2B Diameter -.000 (.00) Entry Size 01 .250 (6.4) .044 (1.12) .560 (14.2) 09 M12 X 1 - 6H .858 (21.79) 01 02 .312 (7.9) .044 (1.12) .630 (16.0) 11 M15 X 1 - 6H .984 (24.99) 01-03 03 .375 (9.5) .044 (1.12) .690 (17.5) 13 M18 X 1 - 6H 1.157 (29.39) 01-05 B 04 .438 (11.1) .044 (1.12) .750 (19.1) 15 M22 X 1 - 6H 1.279 (32.49) 03-07 05 .500 (12.7) .044 (1.12) .820 (20.8) 17 M25 X 1 - 6H 1.406 (35.71) 05-09 06 .562 (14.3) .044 (1.12) .890 (22.6) 19 M28 X 1 - 6H 1.516 (38.51) 06-10 07 .625 (15.9) .044 (1.12) .950 (24.1) 21 M31 X 1 - 6H 1.642 (41.71) 08-12 08 .688 (17.5) .044 (1.12) 1.020 (25.9) 23 M34 X 1 - 6H 1.768 (44.91) 09-13 09 .750 (19.1) .069 (1.75) 1.120 (28.4) 25 M37 X 1 - 6H 1.889 (47.98) 10-14 10 .812 (20.6) .069 (1.75) 1.200 (30.5) 11 .875 (22.2) .069 (1.75) 1.270 (32.3) 12 .938 (23.8) .069 (1.75) 1.260 (32.0) 13 1.000 (25.4) .069 (1.75) 1.370 (34.8) 14 1.125 (28.6) .069 (1.75) 1.470 (37.3) Table III: Symbol and Finish Table IV: Symbol and Finish Table V: (Manufacturers Option) Symbol Finish Symbol Finish Material Finish N Electroless Nickel K Nickel Plate Copper Tin Plate Cadmium/Olive Drab over Electroless T Tin Plate Stainless Steel Passivated W Nickel (1000 Hour Salt Spray) X Nickel Flurocarbon Polymer Z Zinc Nickel APPLICATION NOTES 1. Assembly identification with manufactuers name and part 5. Three (3) holes equally spaced shall be provided and number, space permitting. accommodate .020 (0.51) maximum safety wire for the non- self-locking coupling configuration. 2. Metric equivalents are given for general information only and are based on 1.00 inch = 25.4 mm. 6. .125 (3.2 mm) diameter drain holes will be provided, 4 places, equally spaced (Optional, see part number development). 3. Termination band configuration is not controlled. Band with O-Ring not required when drain hole option is specified. buckle may exceed the Z dimensions (see Table II) provided the band does not interfere with boot attachment. Band material 7. Material/Finish: shall be as specified in Table V. Adapter, coupling nut - Al alloy/see Table III. Termination band - See Table V (manufacturers option). 4. Termination of the accessory shield with harness shield may be Braid - Copper/see Table IV. performed with a GS85049/93 shield support ring or similar split O-Ring - Silicone/N.A. ring accessory types. Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-123 E-Mail: sales@glenair.com AS85049