AS85049 AS85049/121 Straight Strain Relief Self-Locking or Non-Self-Locking Dash No. Finish CONNECTOR DESIGNATOR: Product Series and Table I Table II Basic Part Number Page 62-28 Page 62-28 MIL-DTL-38999 Series I and II F M85049/121 S 08 W S = Detented Self-Locking B N = Non-Detented Self-Locking Use Dash () for Non-Self-Locking (See Note 5) E Coupling Nut C F See Note 4 Screw Captive A Thread Self-locking Nut -typ- G B D .060/.250 (1.52/6.35) Knurl Style Screw .590 Optional Extension (14.99) Max APPLICATION NOTES Captive 1. Assembly to be identified with manufacturers name and parC t number, space permitting. Self-locking Nut See Note 4 Screw -typ- 2. Glenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-128 E-Mail: sales glenair.comAS85049/121 Straight Strain Relief Self-Locking or Non-Self-Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions (Continued Below) Connector Shell C Dim Dash Screw A Thread B Dia D E Max F G Size .031 (0.79) No. Size Class 2B Max Min Length Dim Max Series I Series II See Note 4 .77 (19.6) 08 4-40 9 8 7/16-28 UNEF .858 (21.8) .219 (5.6) .22 (5.6) 1.01 (25.7) .88 (22.4) .51 (13.0) .89 (22.6) 10 4-40 11 10 9/16-24 UNEF .984 (25.0) .264 (6.7) .27 (6.9) 1.13 (28.7) .94 (23.9) .64 (16.3) 1.01 (25.7) 12 4-40 13 12 11/16-24 UNEF 1.157 (29.4) .344 (8.7) .35 (8.9) 1.25 (31.8) 1.12 (28.4) .76 (19.3) 1.01 (25.7) 14 4-40 15 14 13/16-20 UNEF 1.297 (32.5) .460 (11.7) .47 (11.9) 1.25 (31.8) 1.19 (30.2) B .76 (19.3) 1.13 (28.7) 16 4-40 17 16 15/16-20 UNEF 1.406 (35.7) .545 (13.8) .55 (14.0) 1.37 (34.8) 1.44 (36.6) .88 (22.4) 1.38 (35.1) 18 6-32 19 18 1 1/16-18 UNEF 1.516 (38.5) .615 (15.6) .62 (15.7) 1.62 (41.1) 1.56 (39.6) 1.13 (28.7) 1.51 (38.4) 20 6-32 21 20 1 3/16-18 UNEF 1.642 (41.7) .698 (17.7) .70 (17.8) 1.75 (44.5) 1.69 (42.9) 1.26 (32.0) 1.63 (41.4) 22 6-32 23 22 1 5/16-18 UNEF 1.768 (44.9) .780 (19.8) .78 (19.8) 1.87 (47.5) 1.75 (44.5) 1.38 (35.1) 1.76 (44.7) 24 8-32 25 24 1 7/16-18 UNEF 1.869 (47.5) .850 (21.6) .85 (21.6) 2.00 (50.8) 1.88 (47.8) 1.51 (38.4) TABLE II: Material and Finish Symbol Material Finish A Black Anodize N Electroless Nickel W Cadmium, Olive Drab Aluminum Alloy X Nickel Fluorocarbon Polymer Pure Dense Electrodeposited Y Aluminum Z Zinc Nickel S 300 Series SST Passivated Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-129 E-Mail: sales glenair.com AS85049