M85049/140-05BU Glenair

AS85049 AS85049/140 Straight Lipped Heat Shrink Boot Dash Material Drain Holes Number Basic Table II Omit for None Part Number Table I See Note 2 M85049/140 - 05 H C D P B Injection Adhesive Vent Ports C = Adhesive Lined U = No Adhesive P = Vent Ports Table III Omit for None P R See Note 2 H Dia H J Dia T Optional .12 (3.05) Drain Holes JW HW (4 Places, 90 Apart) .12 Ref S (3.05) As Recovered with Drain Holes H Dia J Dia Additional Boot Lips (Mfr Option) See Note 2 As Supplied H RR Optional Optional PP .12 (3.05) .18 (4.57) Vent Port Injection Port As Recovered with Injection-Vent Port Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-142 E-Mail: sales glenair.comAS85049/140 Straight Lipped Heat Shrink Boot TABLE I: Dash Number and Dimensions (Continued Below) J Dia Min J Dia Min P R Dash H Dia Min H Dia Max J Dia Max (As Supplied) (As Supplied) (As Recovered) (As Recovered) No. (As Supplied) (As Recovered) (As Recovered) Material A, B, H Material G 10% Ref 01 0.92 (23.4) 0.41 (10.4) 0.92 (23.4) 0.47 (11.9) 0.24 (6.1) 1.50 (38.1) 0.83 (21.1) 02 1.12 (28.4) 0.56 (14.2) 1.12 (28.4) 0.58 (14.7) 0.26 (6.6) 2.16 (54.9) 1.09 (27.7) 03 1.22 (31.0) 0.70 (17.6) 1.22 (31.0) 0.63 (16.0) 0.28 (7.1) 2.63 (66.8) 1.39 (35.3) 04 1.42 (36.1) 0.88 (22.4) 1.42 (36.1) 0.73 (18.5) 0.38 (9.7) 3.15 (80.0) 1.63 (41.4) 05 1.68 (42.7) 1.11 (28.2) 1.68 (42.7) 0.87 (22.1) 0.39 (9.9) 4.08 (103.6) 2.22 (56.4) 06 2.04 (51.8) 1.38 (35.1) 2.04 (51.8) 1.39 (35.3) 0.63 (16.0) 5.13 (130.3) 2.54 (64.5) B 07 2.60 (66.0) 1.75 (44.5) 2.60 (66.0) 1.80 (45.7) 0.80 (20.3) 6.50 (165.1) 3.31 (84.1) 08 3.22 (81.8) 2.27 (57.7) 3.22 (81.8) 2.25 (57.2) 1.00 (25.4) 7.00 (177.8) 3.75 (95.3) TABLE I: Dash Number and Dimensions (Continued from Above) T HW PP S RR Dash JW Max (As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered) No. (As Recovered) Ref 20% 10% 10% 10% 01 0.04 (1.0) 0.07 (1.8) 0.09 (2.2) 0.60 (15.2) 0.48 (12.2) N/A 02 0.04 (1.0) 0.07 (1.8) 0.09 (2.2) 0.60 (15.2) 0.49 (12.4) .85 (21.6) 03 0.04 (1.0) 0.08 (2.0) 0.10 (2.5) 0.60 (15.2) 0.75 (19.1) .96 (24.4) 04 0.04 (1.0) 0.08 (2.0) 0.10 (2.5) 0.60 (15.2) 0.75 (19.1) 1.17 (29.7) 05 0.07 (1.8) 0.09 (2.3) 0.11 (2.7) 0.60 (15.2) 0.75 (19.1) 1.44 (36.6) 06 0.07 (1.8) 0.13 (3.3) 0.16 (4.0) 0.60 (15.2) 0.57 (14.5) 2.12 (53.8) 07 0.08 (2.0) 0.16 (4.1) 0.19 (4.9) 0.60 (15.2) 0.68 (17.3) 2.59 (65.8) 08 0.08 (2.0) 0.16 (4.1) 0.19 (4.9) 0.60 (15.2) 0.68 (17.3) 2.64 (67.1) TABLE II: Shrink Boot Materials TABLE III: Adhesive Description Material Color Compound Material Description Symbol Adhesive Description Code Code A 2071 Flexible Polyolefin WHITE C Zero Halogen / Hot Melt B 2040 General Purpose Polyolefin RED G 2010 Zero Halogen Polyolefin GREEN H 2025 High Performance Elastomer BLUE APPLICATION NOTES 1. See bag identification for matching boot number, not number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the J end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-143 E-Mail: sales glenair.com AS85049