Optical and Mechanical Encoders Optical Encoders SerieS 60C Multi-Function Joystick FeATUreS Three-in-One Joystick, Optical Encoder and Pushbutton Compact Packaging Choices of Cable Length and Termination Customized Solutions Available APPLiCATiONS Avionics Medical Equipment Automotive Navigation, Information & Entertainment Equipment DiMeNSiONS in inches (and millimeters) Unless otherwise specified, standard tolerance are: JOYSTiCK OPerATiON Linear .025 eNCODer WAVeFOrM Diameter .010 Angle 2.0 Tr UTH TABLe Standard Quadrature 2-Bit Code JOYSTiCK eNCODer Fr ONT MOUNTiNG reAr MOUNTiNG SWiTCH SCHeMATiC Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.comOptical and Mechanical Encoders Optical Encoders CONTr OL KNOBS .505 1.344 .695 inner Knob Outter Knob 1.150 P/N 607702 P/N 607703 .585 .487.002 .080 SPeCiFiCATiONS rotary Slider Plate: Thermoplastic Pushbutton Backplate: Thermplastic electrical and Mechanical ratings electrical and Mechanical ratings Lightpipe, Joystick: Thermoplastic Operating Voltage: 5.00 0.25 Vdc rating: 10 mA at 5 Vdc resistive Lightpipe, 16 pos: Thermoplastic Supply Current: 35mA TYP at 5 Vdc Contact resistance: less than 10 ohms Centering Profile: Thermoplastic Power Consumption: 175mW TYP at 5Vdc Contact Bounce: < 4ms make, 10 ms break Shaft inner: Aluminum Output: Direct output from inverting Schmitt Mechanical Life: 500K actuations minimum Pins: Stainless steel trigger Actuation Force: option 7 = 485 115grams Barbed rivet: Stainless steel Output Code: 2-Bit quadrature, channel A Pushbutton Travel: 0.033 0.015 inches to Detent Balls: Carbon steel 100 with nickel leads channel B by 90 in cw rotation contact 0.075 inches maximum finish Logic Output Characteristics: Centering Balls: Carbon steel 100 with nickel High: No less than 3.5 Vdc environmental ratings finish Low: No greater than 1.0 Vdc Operating Temperature range: -40C to Detent Springs: Tinned music wire Mechanical Life: 500K rotational cycles 85C Centering Springs: Tinned music wire (through all positions and a full return) Storage Temperature range: -55C to Cable ASM: .050 round conductor flat cable, rotational Torque: medium torque option 100C PVC coated. Conductors are stranded, top- 3.00+2.00 in-oz, torque shall be within 50% of relative Humidity: 96 hours at 90-95% coated wire initial value throughout life humidity at 40C Solder: 95.5% SN, 4% AG, 0.5% CU Mounting Torque: 15 in-lbs. maximum Vibration: Harmonic motion with amplitude of Dome: Stainless steel Shaft Push/Pull Out Force: 25 lbs minimum 15g, within a varied 10 to 2000 Hz PCB 16 Pos: NEMA grade FR-4. Plating is Terminal Strength: 15 lbs terminal minimum Mechanical Shock: gold or palladium over nickel Test 1: 100g for 6ms half-sine wave with a infrared emitter: Gallium aluminum arsenide Joystick velocity change of 12.3 ft/s Phototransistor: Planar silicon Test 2: 100g for 6ms sawtooth wave with a electrical and Mechanical ratings resistor: Carbon film velocity change of 9.7 ft/s Operating Voltage: 5.00 0.25 Vdc Schmitt Trigger: RoHS Compliant TSSOP, Thermocycle: 4 hours cycling between Supply Current: 35mA at TYP at 5 Vdc 14 pin -40C to 85C Power Consumption: 175mW TYP at 5Vdc Lubricating Grease: Nyogel 774L Output: Direct output from inverting Schmitt Label: TT406 Thermal transfer cast film Materials and Finishes trigger Bushing: Thermoplastic Logic Output Characteristics: OPTiONS High: No less than 3.5 Vdc Shaft Outer: Thermoplastic Contact Grayhill for custom terminations, Upper Housing: Thermoplastic Low: No greater than 1.0 Vdc rotational torque, number of positions, shaft Mechanical Life: 500K cycles Pushbutton rocker: Thermoplastic Pushbutton Actuator: Thermoplastic configurations, and resolutions. Control knobs (through all positions and a full return) are also available. inner Shaft Slide: Thermoplastic Angle of Throw: 8 max. in all directions OrDeriNG iNFOrMATiON Series Angle of Throw: 22= 22.5 or 16 positions rotation Torque: M= Medium torque Pushbutton: 7= 485 grams Joystick: 4= Four directions 60C22-M7-4-060S Termination: 0.050 center ribbon cable with C= Connector S= 0.1 stripped end Cable Length: 025 thru 250 in 1/2 inch increments, 060= 6.0 inch cable Available from your local Grayhill Distributor. For prices and discounts, contact a local sales office, an authorized distributor, or Grayhill. Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525-5997 USA Phone: 708-354-1040 Fax: 708-354-2820 www.grayhill.com