PCB Hardware Features and Applications: Enhance the grounding of the Cinterion module to the PCB Simple production process: SMT process to solder mounting pillars to the PCB Self-locking screw solution for mounting the module on to the mounting pillars Flexible solution with easy access to remove the module Specifications: Mounting Pillar: Bore Size : 2.7mm Fastener Plating : Nickel Overall Length : 4.1mm External Width : 5 Stacked Height : 4mm Inner Raw Material : Ms58 (C3602) Copper Alloy First Plating Layer : Copper Flash Second Plating Layer : Nickel Plating (1m) Third Plating Layer : Gold Plating (0.8m) Self-locking Screw: Accessory Type : Stand Off Screw Material : Iron Surface : Black Colour (anti-oxidant treatment) Screw Head :Torx Mounting Pillar Self-locking Screw Dimensions : Millimetres www.element14.com www.farnell.com www.newark.com Page <1> 26/11/12 V1.0PCB Hardware Stacking Height Definition: Mounting Instructions: Plated PCB hole size to accommodate the solder mounting pillars : 2.9mm 0.02mm Step 1 : SMT Process for Mounting Pillars Solder the Mounting Pillar in Place Using Solder Paste Applied to Pad on PCB Standard Surface Mount Techniques Step 2 : Mounting the Module with Self-locking Screws Dimensions : Millimetres Part Number Table Description Part Number The torque values for tightening the screws are: Pillar for Cinterion Module, 4mm R-14-0075-F Recommended torque for tightening : 1.5kgf.cm Hardware, PCB, Stand Off, Screw R-14-0067-F Maximum torque for tightening : 1.70 to 1.80kgf.cm Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 26/11/12 V1.0