Product category 60-TE / 60-WTH Thermocouple Assemblies and Resistance Thermometers with Bayonet Nut Connector60-TE / 60-WTH Thermocouple Assemblies and Resistance Thermometers with Bayonet Nut Connector 60-TE / 60-WTH Thermocouple Assemblies and Resistance Thermometers with Bayonet Nut Connector Sensors with bayonet nut connectors are recommended for mea- suring temperatures inside the blocks of machines, mechanisms and die cast forms, primarily in the plastic industry, at temperatures up to 400C. Advantages of Sensors with Bayonet Nut Connectors Reliable construction Bending resistant cabling Class 1 for type J and type K (High measurement precision) The form of the measuring tip is mostly half-round, planar or with a point angle of 118. The latter aligns itself very well into a standard bore hole. The sensors are fitted with a pressure spring that, in combination with the correct installation length, respectively contact pressure at the installation point, protects the cable from deflexion. The instal- Application Examples for Thermocouple Assemblies and Resis- lation length is variable, limited by the length of the pressure spring. tance Thermometers with Bayonet Nut Connector: Please find the standardised inner diameter of bayonet nut con- nectors in the table on the right. Please note, that we do offer Plant and Machine Construction customised versions. Heat Treatment Plastic Industry The standard mounted measuring elements are Pt 100: 2-, 3- or 4-wire, accuracy class N pursuant to EN 60751 or thermo- couple types J and K in class 1. Double versions or the application of special sensors are also possible. Visit us online at: www.guenther.eu