HARTING PROFINET Type A Cable 4-wire, Cat. 5, PVC PROFINET Type A Cable 4-wire, Cat. 5, PVC Advantages General This data cable is suitable for PROFINET cabling Suitable for PROFINET cabling according to type A in industrial premises and areas. It Category 5 / Class D according to is useable for fixed installation. The core is fitted with 4 ISO/IEC 11801 respectively EN wires twisted to quad that allows the transmission of 50173 and ISO/IEC 24702 Fast Ethernet 10/100Mbit/s. respectively EN 50173-3 It is designed for fast assembling with the easy-stripping Capable fixed installation tool and can be assembled with all HARTING 4-pole Applicable for industrial premises RJ45 connectors. RoHS conform, UL listed, flame retardant Description Order number PROFINET Type A Cable 4-wire, Cat. 5, PVC 20 m ring 09 45 600 0130 50 m ring 09 45 600 0140 100 m ring 09 45 600 0100 500 m reel 09 45 600 0110 Wire: Solid bare copper AWG 22/1 Insulation: : PE 1.5 mm Inner sheath: Polyvinylchloride (PVC) Overall screen: Aluminate foil overlapped, tinned copper wire braid, braid coverage about 90% Outer sheath: Polyvinylchloride (PVC), flame retardant Color code: wh, ye, bu, or Color of inner sheath: white Color of outer sheath: green, RAL 6018 Overall diameter: 6.3 mm 6.7 mm All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 21.11.2007 PROFINET Type A Cable, 4-wire, Cat. 5, PVC Technical Characteristics Performance Category 5 according to EN 50288-2-1:2003, IEC 61156-5:2002 Mechanical Characteristics Minimal bending radius During installation: 7,5 x diameter After installation: 3 x diameter Tensile strength max. 150 N Electrical Characteristics at 20C Surface transfer impedance at 10 MHz 10 mOhm/m Loop resistance max. 115 Ohm/km Insulation resistance min. 500 MOhm*km Signal runtime 5.3 ns/m Characteristic impedance at 100 MHz 100 Ohm +/- 5 Ohm Test voltage (wire/wire/screen rms 50 Hz 2000 V 1min) Chemical Characteristics Flame retardant IEC 60332-1-2 Free of hazardous substances RoHS 2002/95/EG Limited oil resistance Sunlight resistant UL 1581 Sec.1200 Thermal Characteristics Permissible temperature range - 40 C to + 75 C During laying - 20 C to + 60 C Printing HARTING INDUSTRIAL ETHERNET STANDARD CABLE CAT 5 PLUS * 22AWG (SHIELDED) (UL) E119100 VERIFIED CAT 5E CMG 75C or PLTC or AWM 20201 600V FT4 SUN RES * 094560001000100sequential length in metre *year/internal order numbeHARTING-LOG Weight about 66 kg/km All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 21.11.2007