Chip Type Cermet Trimmer Potentiometer 3mm size, Low profile type 3mm Features Low profile type ( 1.2mm in height ) Achieved good endurance characteristics by using Metal-glaze for the material of resistor Conforms to RoHS Directives Reflow solderable Outline Dimensions (Unit : mm) Wiper Rotating Area Pattern Application Example 3.7 Maximum resin sealed area Resin 1.5 3 TERM.2 1.6 2.1 1.2 0.75 0.8 1.2 0.8 1.2 0.65 TERM.3 TERM.1 2.7 C.W. Circuit Term. 1 Term. 3 Term. 2 Specification Item Specification Unit Note 1001M Nominal Total Resistance Resistance Tolerance 25 % Rotational Torque 0.9811.76 mN.m Effectively Rotary Angle 270 20 Non stopper Rated Wattage 0.15 V Max. Rated Voltage 50 or V= PR whichever is smaller T.C.RTemperature Coefficient 250 ppm/ Operating Temp. Range -40 +100 Part Designation VG 039N SN XT B Resistance law and Resistance value ( 3 figures ) Taping type (8mm width4mm pitch emboss taping for auto insertion) SMD Type ( Non stopper ) Size Resistive element type : Metal-glaze Packaging Quantity 2500 pcs / Reel 2018.7.1 Specifications are subject to change without notice HOKURIKU 1 3.8 2 1.75 0.5 (1) 0.95 1.2 0.7 1.2 1.5Chip Type Cermet Trimmer Potentiometer 3mm size, Low profile type Features Low profile type (1.2mm in height) With rotation stopper Achieved exellent endurance characteristics by usingMetal-glaz film. Conform to RoHS Directives Reflow solderable Dimensions (Unit: mm) 3. 7 Wiper Rotating Area) 1. 5 3 1. 2 Terminal 2 2. 1 Maximum resin sealed area 0. 75 1.6 0. 8 1.2 0.8 1.2 Terminal 1 0. 65 Terminal 3 2. 7 C.W. PCB Footprint Circuit Terminal 3 Terminal 1 Terminal 2 Specification Item Specification Unit Note Nominal Total Rasistance 100 ~ 1 M Rasistance Tolerance 25 % mN m Rotational Torque 0.98 11.76 End Stop Strength 14.7 min. mN m With rotation stopper Total Mechanical Rotation Angle 270 20 Rated Wattage 0.15 W Max. Working Voltage 50 or V= PR whichever is smaller V ppm/ T.C.R. (Temperature Coefficient of Resistance) 250 Operating Temperature Range -40 100 Model Designation VG 039N CH XT B*** Characteristics and Resistance value (3 figures) Taping type (8mm width 4mm pitch emboss taping for auto insertion) SMD type Size Model No. Resistive element type (Metal glaze) *Packaging Quantity : 2,500pcs / Reel 2018.7.1 2 HOKURIKU Specifications are subject to change without notice. 3. 8 2 1. 75 0. 5 ( 1 ) 0. 95 1.2 0.7 1.5 1.2