Specification Sheet Part Number: 553-50011 Slide Slit and optional center slits for easy wire insertion. Smooth surface for clean and legible printing. Supplied on a ladder style carrier so that markers can be kitted after printing. A 3:1 shrink ratio means fewer skews as each marker covers a wider range of wire diameters. ShrinkTrak Labels, 1-Sided, 1-Slit, .187 (4.74mm), PO-X, White, 500/box Article Number 553-50011 Type HST4.8-1.6WH-S Color White (WH) Quantity Per box Product Description HellermannTyton s ShrinkTrak heat shrinkable markers make it easy to mark wire, cable and other components. The military approved heat shrink tubing is flattened and assembled in a ladder style carrier system for easy printing using a thermal transfer printer. The ladder system creates a kit of markers that can be sorted, removed and applied in any order thus saving time, labor and speeding production. Short Description ShrinkTrak Labels, 1-Sided, 1-Slit, .187 (4.74mm), PO-X, White, 500/boxGlobal Part Name HST4.8-1.6WH-S-PO-X-WH Variant Thin-Wall Width W (Imperial) 0.95 Width W (Metric) 24.13 Thickness T (Imperial) .003 Thickness T (Metric) .0762 Height H (Imperial) 0.312 Height H (Metric) 7.92 Width of Liner (Metric) 76.2 Width of Liner (Imperial) 3.0 Outside Diameter OD (Imperial) 0.187 Outside Diameter OD (Metric) 4.74 Outside Diameter Max (Imperial) 0.187 Outside Diameter Max (Metric) 4.74 Wall Thickness WT (Imperial) 0.026 Wall Thickness WT (Metric) 0.66