Q50R-W-BK-C1 HellermannTyton

Cable Ties and Fixings 1.1 Cable Ties Inside Serrated Q-ties Innovative Effective Safe The new Q-tie has not only innovative, but also has a revolutionary new design. The open head of the cable tie enables a simple and quick installation. Simply insert the ergonomically bent tail into the open side of the head and tighten the cable tie. With Q-ties you can save time and money The head design makes the difference. Easy Application for every Situation Q-tie provides the perfect solution for applications in difficult working conditions. It is ideal for use when working with gloves is necessary or for blind applications with a limited view of the work allowing for a quick and simple installation. Features for quick and easy application: Large curved tail with easy-grip ribs Open head with easily detectable slot This saves time and trouble Even under difficult circumstances the Q-tie cable tie is very fast and easy to apply. Integrated Pre-locking Functionality Due to several simultaneous working processes, it is not always possible to install all cables and conduits in one single step. Using standard cable ties means either removing the cable tie of the first installation or applying additional cable ties. The integrated pre-locking function offers both a temporary and final cable fastening solution. This saves material and time Without additional effort only Q-ties can be used for temporary and final cable bundling. Application video: Q-Series 52 Further information at www.HellermannTyton.com/fixings Date of issue: October 2015Cable Ties and Fixings 1.1 Cable Ties Inside Serrated Features of Q-ties: 1. Open lock head for quick and easy insertion. 2. T wo rails on the strap ensure perfect guidance for the tracks in the head. 3. The locking device inter acts safely with the serration of the cable tie. 4. The tracks prevent a deformation of the head under load. 5. The thin part of the cable tie can be simply placed into the open lock head. 6. The large ribbed tail allows a safe and ergonomic installation. 7. Integr ated pre-locking feature (starts with type Q30). Application Method: Please find more Q-Series products for your system solution on page 134 and 459. 1. Insert the thin part of the cable tie into the 2. Pul l the tie through the head until the bundle open lock head. is fixed. 3. Cut off the remaining part of the tie with an application tool. Pre-Locking Function of the Q-tie: 1. Insert tail into the open head and push the tail 3. When the installation is complete, the Q-tie can 2. T o release the tie push the tail slightly out of partly into the head. be tightened and cut off - either manually or the head. with an application tool. Further information at www.HellermannTyton.com/fixings 53 Date of issue: October 2015