NNeexxeennssooss CC442200,, PPtt TTeemmppeerraattuurree SSeennssoorr aaccccoorrddiinngg ttoo DDIINN EENN 6600775511 Temperature range -196 C to +150 C Ideal for cryo temperatues The C420 thin-film Pt-RTD provides the ideal curve characteristics of ceramic wire-wound RTDs with the added Excellent long term stability and low drift benefits of high vibration resistance and lower cost. High High accuracy and interchangeability long-term stability, excellent thermal shock resistance and a High thermal shock resistance hysteresis-free operating temperature range of -196 C to Free of hysteresis +150 C offer an ideal solution for chemical & pharmaceutical processing, cryogenics, analytical equipment, and cold chain monitoring. NNoommiinnaall RReessiissttaannccee RR TToolleerraannccee CCllaassss OOrrddeerr NNuummbbeerr PPaacckkaaggiinngg Pt1000 F 0.3 (Class B) 32207502 VCI-Plastic bag The measuring point for the nominal resistance is 13 mm from the end of the sensor body. TTeemmppeerraattuurree RRaannggee ooff TToolleerraannccee CCllaassss DDiimmeennssiioonnss aanndd TToolleerraanncceess iinn mmmm Tolerance Class F 0.3 (B) -196 C to +150 C L: 3.9 0.15 W1: 1.9 0.15 TTeemmppeerraattuurree CCooeeffffiicciieenntt H: 1.0 +0.3 -0.2 TCR = 3850 ppm/K LL: 15 1.0 L: 0.25 0.02 RReessppoonnssee TTiimmee W2: 0.8 0.1 Water (v = 0.4 m/s): t0.5 = 0.08 s t0.9 = 0.25 s Air (v = 2 m/s): t0.5 = 3.5 s t0.9 = 15 s MMeeaassuurriinngg CCuurrrreenntt Pt1000 : 0.1 to 0.3 mA (self-heating has to be considered) Image for illustration purposes only Color, shape and forming of fixing drop may vary Heraeus Nexensos GmbH, Germany Document: 20002219724 Part 001 Version 01 Status: 09/2021 Web: www.heraeus-nexensos.com Contact: nexensos.america heraeus.com Page 1 of 2NNeexxeennssooss CC442200,, PPtt TTeemmppeerraattuurree SSeennssoorr aaccccoorrddiinngg ttoo DDIINN EENN 6600775511 Temperature range -196 C to +150 C LLoonngg--TTeerrmm SSttaabbiilliittyy LLeeaadd TTyyppee The drift of the resistance value at 0 C after a storage for AgPd 1000 hours in air at the declared upper temperature limit is TTeennssiillee SSttrreennggtthh ooff LLeeaaddss not more than the tolerance value of the declared tolerance 8 N class according DIN EN 60751. Typical drift of R(0 C) is 0.03 % after 1000 hours at +150 PPaacckkaaggiinngg C. VCI-Plastic bag Alternative packaging forms on request. SSeellff--HHeeaattiinngg 0.3 K/mW at 0 C SSttoorraaggee LLiiffee Min. 12 months (in original packaging) IInnssuullaattiioonn RReessiissttaannccee > 100 M at 150 C NNoottee Other tolerances, values of resistance and wire lengths are VViibbrraattiioonn RReessiissttaannccee available on request. At least 40 g acceleration at 10 to 2000 Hz, depends on installation C220 and C420 Pt elements are optimized for low- SShhoocckk RReessiissttaannccee temperature use. To avoid a potential tolerance shift, the At least 100 g acceleration with 8 ms half sine wave, depends elements should not be exposed to temperatures exceeding on installation 150 C during storage, assembly, or use. CCoonnnneeccttiioonn TTeecchhnnoollooggyy Due to random sample measurements, a bending of Soft Soldering connection wires may occur (called V-shape). This bending is batch-dependent and has no influence on the functionality of the platinum measuring resistor. CCaalliiffoorrnniiaa PPrrooppoossiittiioonn 6655 WWAARRNNIINNGG WARNING: This product can expose you to chemicals including lead oxide, which is known to the State of California to cause cancer and birth defects or other reproductive harm, and including cobalt oxide, which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov The information provided in this data sheet describes certain technical characteristics of the product, but shall not be qualified or construed as quality guarantee (Beschaffenheitsgarantie) in the meaning of sections 443 and 444 German Civil Code. The information provided in this data sheet regarding measurement values (including, but not limited to, response time, long-term stability, vibration and shock resistance, insulation resistance and self-heating) are average values that have been obtained under laboratory conditions in tests of large numbers of the product. Product results or measurements achieved by customer or any other person in any production, test, or other environment may vary depending on the specific conditions of use. The customer is solely responsible to determine whether the product is suited for the customer s intended use in this respect Heraeus cannot assume any liability. The sale of any products by Heraeus is exclusively subject to the General Terms of Sale and Delivery of Heraeus in their current version at the time of purchase, which is available under www.heraeus.com/gtc or may be furnished upon request. This data sheet is subject to changes without prior notice. Heraeus Nexensos GmbH, Reinhard-Heraeus-Ring 23, 63801 Kleinostheim, Germany Heraeus Nexensos GmbH, Germany Document: 20002219724 Part 001 Version 01 Status: 09/2021 Web: www.heraeus-nexensos.com Contact: nexensos.america heraeus.com Page 2 of 2