Temperature Sensor Glass Wire-Wound Resistance Element Type GX (-200C to +400C) APPLICATIONS - Environments subject to high vibration Glass wire-wound - Cryogenics suitable for high - Accurate temperature measurements in high temperature gradients vibration applications - Limited mounting space required - Food industry - H.V.A.C. SPECIAL FEATURES - No hysteresis - Small dimensions - High temperature stability - Short response time - High vibration resistance DESIGN One or two platinum bands are wound on a glass tube and are protected from environment by a glass layer. The lead wire connection has high pull strength. NOMINAL VALUE - 100 at 0C - Temperature coefficient = 3850 ppm/K TOLERANCE CLASS - IEC 751 : class B, A and B/3 - Closer tolerances in restricted temperature range TEMPERATURE RANGE - From -200C to +400C CONNECTION WIRES - Platinum coated nickel wires HOUSING ADVICE - For use in dry environments only RESISTANCE AND STABILITY - No hysteresis - High vibration resistance - Resistant to external forces and pressure OPTIONS - Lead wires length - Extension cable Attention : All technical data and recommendations concerning the products and services of our firm are for information purposes only. No data given in our technical datasheets guarantee particular properties to any products. They represent values obtained by experience and are intended as guidelines only. Seller reserves the right to make alterations in illustrations and technical data printed, resulting from further development. Heraeus Sensor Technology USA 1901 Route 130 North Brunswick, NJ 08902 Rev. 02-07 Phone 732-940-4400 Fax 732-940-4445 HSTUSA 10/09 Email info.hst-us heraeus.com www.hst-us.comStandard Product Type GX Desi- Nominal Self-heating Type Reference LWL D AL1 AL2 A Response time gnation reference in air Water Air v = 0,4 m/s v = 1 m/s t0,5 t0,9 t0,5 t0,9 (Ohm at 0C) (Dimensions in mm) (K/mW) (s) Class B 1Pt100 GX 518 32 205 108 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1013 32 205 113 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 4 12 1Pt100 GX 1018 32 205 118 100 10 6 1,8 10 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1218 34 015 120 100 12 3 1,8 6 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1513 SB0921 100 15 6 1,3 10 - 0,20 0,39 0,4 1,3 4 12 2Pt100 GX 1528 32 205 228 100 15 7 2,8 10 12 0,25 0,20 0,3 1,0 12 45 Class A 1Pt100 GX 518 32 205 074 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1013 32 205 458 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 4 12 1Pt100 GX 1218 34 015 121 100 12 3 1,8 6 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1513 SB0920 100 15 6 1,3 10 - 0,20 0,39 0,4 1,3 4 12 2Pt100 GX 1528 32 205 241 100 15 7 2,8 10 12 0,25 0,20 0,3 1,0 12 45 Class B/3 1Pt100 GX 518 32 205 101 100 5 3 1,8 10 - 0,20 0,36 0,14 0,35 8 30 1Pt100 GX 1013 32 205 463 100 10 6 1,3 10 - 0,20 0,39 0,4 1,30 4 12 1Pt100 GX 1513 SB0919 100 15 6 1,3 10 - 0,20 0,39 0,4 1,3 4 12 DIMENSIONAL TOLERANCES : L (length of body) = 1mm D (diameter of body) = +0,1-0,3mm AL (connection wire length) = 2mm A (connection wire diameter) = 0,02 mm Attention : All technical data and recommendations concerning the products and services of our firm are for information purposes only. No data given in our technical datasheets guarantee particular properties to any products. They represent values obtained by experience and are intended as guidelines only. Seller reserves the right to make alterations in illustrations and technical data printed, resulting from further development. Rev. 02-07 HSTUSA 10/09