Stay Connected with Liquid Tight Cordgrips Heyco Original Series-35 Liquid Tight Cordgrips Straight-Thru, NPT Hubs CABLE DIA. RANGE PART NO. DESCRIPTION PART DIMENSIONS Wide range of approved cable Locknuts AB C D E diameters. Minimum Maximum Not Included* or Clearance Max. O.A. Thread Wrenching Nut IP 68 rated. Black Gray Hole Dia. Length Length Thk. Flat Size Acme threads on body prevent in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. in. mm. skipping and speed installation069 1,8 .187 4,7 3458 3459 RLTF 3/8 .670 17,0 1.49 37,8 .53 13,5 .20 5,1 .75 19,1 .115 2,9 .312 7,9 3228 3229 LTF 3/8 For use in clearance or threaded holes170 4,3 .450 11,4 3231 3232 LTF 1/2 .875 22,2 1.72 43,7 .62 15,7 .20 5,1 .95 24,1 All nylon construction with TPE sealing .230 5,8 .546 13,9 3200 3201 LLTF 1/2 .875 22,2 1.83 46,5 .62 15,7 .23 5,8 1.05 26,7 gland resists salt water, weak acids, .250 6,4 .485 12,3 3204 3205 MRLTF 1/2 gasoline, alcohol, oil, grease, and .875 22,2 1.97 50,0 .63 16,0 .23 5,8 1.30 33,0 .450 11,4 .709 18,0 3202 3203 MLTF 1/2** common solvents. (This feature is not .250 6,4 .485 12,3 3460 3461 RLTF 3/4 1.068 27,1 1.97 50,0 .63 16,0 .23 5,8 1.30 33,0 assessed by UL.) .450 11,4 .709 18,0 3234 3235 LTF 3/4 Multiple sizes for flexible cord .590 15,0 1.000 25,4 8437 8438 LTF 1 1.350 34,3 2.42 61,5 .75 19,1 .28 7,1 1.65 41,9 diameters ranging from .069 Standard colors black and gray. (1,8 mm) to 1.000 (25,4 mm). For *To order Nylon or Metal Locknuts separately, see pages 3-47 and 3-48. **For cable diameters greater than .600, the insulating jacket must be stripped back. Reference customer drawing 3202/3203. larger sizes, see Heyco-Tite Liquid For larger sizes, see Heyco-Tite Liquid Tight Cordgrips on page 3-1. Tight Cordgrips on page 3-1. Acme threads We recommend using the cordgrip prevent skipping, with the smallest maximum diameter speed installation. that will fit your application. Cable TPE compression ranges listed are for the maximum gland for sealing. IP68 sealing range. Contact Heyco for UL approved 514B cable ranges. Domed sealing nut resists snags, sheds Locknuts not included. For nylon contaminants. locknut specifications or to order locknuts separately, see page 3-47. For Heyco Liquid Tight Threaded Special contour provides light seal Plugs, see page 3-51. at mounting panel Consult Heyco for cordgrips molded without O-ring. Internal ratchet Collet design of in other colors. provides self-locking body accommodates against vibration. various size cords, cables, tubing. B A C D*** E SUGGESTE D CLEARANC E HOLE FOR NONTHREADE D MOUNTING SEALING NUT Consult Heyco for your alternate material requirements Material Nylon 6/6 with TPE Sealing Gland Certifications Listed under Underwriters Laboratories File E51579 Recognized Under the Component Program of Underwriters Laboratories File E51579 Certified by Canadian Standards Association File 93876C Quick Flammability Rating 94V-2 Temperature Range Static -40F (-40C) to 239F (115C) Dynamic -4F (-20C) to 212F (100C) Specs IP Rating IP 68 (70 PSI, 5 BAR) 3-19 1-800-526-4182 732-286-1800 (NJ) FAX: 732-244-8843 www.heyco.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Cable Glands, Strain Reliefs & Cord Grips category: Click to view products by Heyco manufacturer: Other Similar products are found below : 1218 1300980012 1300980105 DBZM-6828 1498 915 300623 5632NM 1124 1151 561-MP6P4WH 5534M 9000005073 52104486 5315817 N16 025 0112 1 N16 020 0112 1 M6106 7422 NG-9516 Gasket N16 016 0112 1 NG-9514 Gasket 52006151 2704 1.097.2012.50 1.152.1300.01 1.152.2000.50 1.152.2100.01 1.152.4000.50 1.209.1218.70 1.209.6400.71 1.609.1100.01 1.609.2900.15 1.609.3200.52 1.609.5000.51 1.609.6300.50 1.676.2500.50 53112705 53112715 53112735 53119073 54115405 52004120 52001894 53018160 APGPG36BA 1300990004 1.033.0913.01 1.033.1116.01 1.033.2936.01