Stay Connected with Bushings, Grommets, HEYcaps & Plugs Heyco EPDM Snap-In Liquid Tight Bushings Mounting Hole Diameter Range: .492 (12,5 mm) to 1.988 (50,2 mm) Simple to installsnap LTB into MOUNTING CABLE PART NO. DESCRIPTION PART DIMENSIONS HOLE DIAMETER DL H place, cut cable end at a 45 angle, DIAMETER RANGE Black Gray Hole Head Overall Head pierce thin LTB membrane then insert Size Diameter Length Thickness and pull back cable to form a liquid in. mm. in. mm. in. mm. in. mm. in. mm. tight seal. PG Sizes for Panel Thickness from .04 (1,0 mm) to .16 (4,0 mm) Available in Black and Gray color519 13,2 .12-.20 3,0-5,0 4014B 4014 LTB 30-50/PG7 PG7 .77 19,5 .53 13,5 Provide light strain relief to the cable630 16,0 .20-.28 5,0-7,0 4015B 4015 LTB 50-70/PG9 PG9 .81 20,5 .77 19,5 .28 7,0 Can be used as a liquid tight plug750 19,0 .28-.39 7,0-10,0 4016B 4016 LTB 70-100/PG11 PG11 .98 25,0 .83 21,0 Offers protection to IP 67906 23,0 .31-.55 8,0-14,0 4017B 4017 LTB 80-140/PG16 PG16 1.10 28,0 .89 22,5 .26 6,5 Ozone and weather resistant. 1.142 29,0 .55-.79 14,0-20,0 4018B 4018 LTB 140-200/PG21 PG21 1.37 34,7 1.04 26,5 .30 7,5 For outdoor and indoor applications. 1.500 38,0 .79-1.02 20,0-26,0 4019B 4019 LTB 200-260/PG29 PG29 1.80 45,7 1.10 28,0 .28 7,0 1.890 48,0 1.02-1.38 26,0-35,0 4020B 4020 LTB 260-350/PG36 PG36 2.26 57,5 1.44 36,5 .30 7,7 Sizes available to fit cable diameters ranging from .12 (3,0 mm) Metric Sizes for Panel Thickness from .04 (1,0 mm) to .16 (4,0 mm) up to 1.38 (35,0 mm)492 12,5 .16-.28 4,0-7,0 4007B 4007 LTB 30-50/M12* M12 .79 20,0 .50 12,7 .650 16,5 .20-.35 5,0-9,0 4008B 4008 LTB 50-70/M16 M16 .83 21,0 .71 18,0 .807 20,5 .32-.51 8,0-13,0 4009B 4009 LTB 70-100/M20 M20 1.00 25,5 .79 19,5 .26 6,5 1.004 25,4 .43-.67 11,0-17,0 4010B 4010 LTB 100-140/M25 M25 1.20 30,5 .85 21,5 1.280 32,5 .59-.79 15,0-20,0 4011B 4011 LTB 140-200/M32 M32 1.52 38,5 .98 24,8 1.594 40,5 .75-1.10 19,0-28,0 4012B 4012 LTB 200-260/M40 M40 1.91 48,5 1.18 30,0 .32 8,1 1.988 50,2 1.06-1.38 27,0-35,0 4013B 4013 LTB 260-350/M50 M50 2.38 60,5 1.38 35,0 *Panel thickness from 0,5 mm (.02) to 2,0 mm (.08). L Push Through D Pull Back H 1. A sharpened dowel pin is 2. The dowel pin is inserted 3. Wire is inserted through selectedslightly smaller into the opening on the front the LTB and then pulled back than the wire diameter of the LTB and pushed to create a seal through the membrane Material EPDM Quick o Temperature Range -40F (-40C) to 200 F (93C) IP Rating IP 67 Specs 1-800-526-4182 732-286-1800 (NJ) FAX: 732-244-8843 www.heyco.com 6-18X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Grommets & Bushings category: Click to view products by Heyco manufacturer: Other Similar products are found below : M10-036565-101 M10-036565-143 M10-036565-183 205339-4 M10-036565-122 M10-036565-163 3-1991136-0 561-FGUP0850B 561- MP13716 561-FGUP0400N 1398081-1 1301800320 M10-036565-232 2298 2407 2141-P HTL-40-10-TPE 2417-P 2917-P 3108-P 2871-P 100187 100188 100216 100223 100236 52001970 52002000 52002010 52002020 52002050 1301800412 FEM 27-35 100175 100176 100178 100182 100196 100238 100244 100744 100084 100174 100177 100179 100180 100181 100186 100721 103584