PROXIMITY SWITCH Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements and installation situations. Thus, devices are available with N.C. or N.O. functions, with NPN or PNP switching outputs, and cable or plug connection. The enclosure rating is IP66. Features Easy-to-use and tough Wide range of models Wide operating voltage range Short circuit protected Ideal for a variety of applications With a metal connector that can be tightened securely and a cord protector Enclosure rating of IP66, water-proof and oil-drip proof Fast response Specification Item Standard Differential travel 10% max. of sensing distance Ferrous metal (The sensing distance decreases with non-ferrous Target metal.) Power supply voltage 12 ~ 24 VDC. Ripple (p~p): 10% max. (operating voltage range) (10 ~ 30 VDC) Current consumption (DC 3-wire) 10 mA max. Output type See Product selection Load current Control 200 mA max. (32 VDC max.) (See note 1.) output Residual voltage 1 V max. (under load current of 200 mA with cable length of 2 m) Operation mode See Product selection (with sensing object approaching) Output reverse polarity protection, Power source circuit reverse Protection circuit polarity protection, Surge suppressor, Short-circuit protection Operating: -40 to 70 , Storage: -40 to 85 (with no icing or Ambient air temperature condensation) 10% max. of sensing distance at 23 within temperature range of -25 to 70 Temperature influence (See note 1.) 15% max. of sensing distance at 23 within temperature range of -40 to 70 Ambient humidity Operating: 35% to 95%, Storage: 35% to 95% Voltage influence 1% max. of sensing distance in rated voltage range 15% Insulation resistance 50 M min. (at 500 VDC) between current carry parts and case 1,000 VAC at 50/60 Hz for 1 min between current carry parts and Dielectric strength case 10 to 55 Hz, 1.5mm double amplitude for 2 hours each in X, Y Vibration resistance and Z directions 2 Shock resistance 1,000 m/s , 10 times each in x, Y and Z directions IEC60529: IP66, Degree of protection Standards and listings EN60947-5-2: EMC Note : When using any model at an ambient temperature between -40C and -25C and a power voltage between 30 and 32 VDC, use a load current of 100 mA max., HIGHLY D1 Design, specifications are subject to change without notice. PROXIMITY SWITCH Product selection TS - - 1 2 3 4 5 1. Housing outline 3. Sensing distance TS: Inductive thread round Numeral: Sensing distance: S : Inductive square E.g. 02=2 mm, 16=16mm CS: Inductive thread round connector 4. Output stage 2. Dimension of sensing face N: NPN open collector DC mode TS CS type series P: PNP open collector DC mode 12: diameter 12mm 5. Output function 18: diameter 18mm 1: N.O. normally open 30: diameter 30mm 2: N.C. normally close S type series 17: square 17mm x 17mm 18: square 18mm x 18mm 18L: square 18mm x 18mm 25: square 25mm x 25mm 30: square 30mm x 30mm 40: square 40mm x 40mm Example: Inductive thread round housing, M12, Sn=5mm, NPN-DC, normally open, TS12-05N-1 Inductive square 18x18 mm, Sn=5mm, NPN-DC, normally open. S18-05N-1 Output stage diagram NO NC PNP M12 connector Pin Arrangement M12 connector Pin Arrangement Terminal 2 of the M12 connector is Terminal 4 of the M12 connector is not used. not used. NPN M12 connector Pin Arrangement M12 connector Pin Arrangement Terminal 2 of the M12 connector is Terminal 4 of the M12 connector is not used. not used. HIGHLY D2 Design, specifications are subject to change without notice.