DF13-TB2630HC Hirose

Fourth edition ATAD-P0112 4 / HT302 Manual crimping tools Type HT302 INSTRUCTION MANUAL / CAUTION : Be sure to read this Instruction Manual carefully before using it to secure safe operation. Save this Instruction Manual so that it is available whenever necessary. 1. 2. 1. 2. 3. 4. FOR SAFE OpERATION The operators of the tool and the maintenance personnel who are in charge of maintenance and repair work are required to read the following SAFETY INSTRUCTIONS . Fully understand and follow the descriptions given in this Instruction Manual and the warning symbols attached to the tool. SAFETY INSTRUCTIONS CAUTION Basic safety instructions Be sure to read understand and follow all the instructions and other materials supplied with the tool before use. Save this Instruction Manual and make it available, when necessary. Safe operation Be sure to use the tool as instructed so that your fingers nor part of clothing is caught in the tool during crimping operation. Application 1. This tool shall only be used for its originally intended purpose while following the instructions specified in this Instruction Manual. Hirose assumes no responsibility for any misuse of the tool other than the intended use. 2. Modifications to this tool is prohibited. We assume no responsibility for accidents resulting from modifications. Maintenance 1. To prevent possible accidents caused by unfamiliarity with the operation of the tool, repair and adjustment of the tool shall be conducted only by fully trained maintenance personnel. Any repair and adjustment beyond the range covered by the instructions given in this Instruction Manual is prohibited. We assume no responsibility for accidents caused by improper repair or adjustment or the use of non-genuine part(s). 2. To protect against personal injury, assure that screws and nuts are properly tightened after the completion of repair/ adjustment works or replacement of the parts. 3. periodical cleaning of the tool is recommended. 4. In the event that your tool fails to perform satisfactory after repair or adjusting immediately stop the work and contact HRS for service. i