17.82 mm (80 pos.) 0.2 mm Pitch, 1.2 mm Height, FPC Connector FH29 Series Easy mounting with double-sided lead design 1.2 mm height, 4.55 mm mounting depth 4.55mm Features With metal fitting type 1. Space saving 0.2 mm pitch FPC connector Super thin, space saving design with 1.2 mm connector height and 4.55 mm mounting depth. *40% reduction in PCB footprint *50% reduction in weight (Compared to our 0.3 mm pitch FH23 Series 80 position connector.) 2. With metal fitting type is also available The addition of reinforcing metal fittings improve the The reinforcing metal fittings support the actuator from operability during actuator operation. below, this leads to an easier locking function. 3. Easy solderability on the PCB FPC insertion The leads are double sided and have 0.4 mm mounting lead pitch to simplify mounting. 4. Easy FPC insertion ActuatorActuator The FPC aligning mechanism holds onto the FPC prior to locking the actuator. This also helps to increase the retention force of this connector. 5. Accepts standard 0.2 mm thick FPC This connector accepts standard 0.2 mm thick FPC. (A stiffener with adequate strength will prevent FPC deformation and ease insertion and mating.) FPC tabFPC tab 6. Rotating one-touch ZIF mechanism The one-touch rotating ZIF mechanism is easier to operate and FPCFPC works with a light force, and a clear tactile click is delivered upon the successful completion of the mating process 7. Molded structure aids PCB layout The bottom of this connector is enclosed by a fully molded structure that protects FPC lock completion the contacts and removes any restrictions from PCB patterning and layout design. 8. Suitable for automatic pick-n-place mounting Offered in tape and reel packaging that is compatible with automatic machine mounting. (5,000 pieces per reel) 9. Halogen-free Halogen free connectors are available please use the FH29BW, FH29BJ and FH29DJ type connectors. All materials and substances used to produce the FH29BW, FH29BJ, FH29DJ series product complies with Halogen-free standards. * Defined according to IEC61249-2-21 Br: 900ppm max, Cl: 900ppm max, Br+Cl: 1,500ppm max. 10. Suitable for automatic pick-n-place mounting The standard packaging is 5,000 pieces per reel, but it is also offered in a 500 piece reel. (The outer diameter of the reel will be 180 mm in this case.) 2013.11 1 Jun.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.2mmFH29 Series0.2 mm Pitch, 1.2 mm Height, FPC Connector Product Specifications Operating temperature range: -55C to 85C (Note 2) Storage temperature range: -10C to 50C (Note 3) Rated current: DC 0.25 A (Note 1) Rating Operating humidity range: relative humidity 90% max Storage humidity range: relative humidity 90% max Rated voltage: AC/DC 40 Vrms (No condensation) (No condensation) Recommended FPC spec. Thickness = 0.2 0.03 mm gold plated Item Specifications Conditions 1. Insulation resistance 500 M min. DC 100 V 2. Withstanding voltage No flashover or insulation breakdown AC 120 Vrms/1 minutes 100 m max. 3. Contact resistance 1 mA * including FPC conductor resistance Contact resistance: 100 m max. 4. Durability 20 mating cycles No damage, cracks, or parts dislocation. No electrical discontinuity of 1 s or longer. frequency: 10 to 55 Hz, single amplitude of 5. Vibration Contact resistance: 100 m max. 0.75/mm, 10 cycles in each of the 3 directions No damage, cracks, or parts dislocation. 2 No electrical discontinuity of 1 s or longer. Acceleration of 981 m/s , 6 ms duration, sine 6. Shock Contact resistance: Maximum of 100 m max. half-wave, 3 cycles in each of the 3 axial No damage, cracks, or parts dislocation. directions Contact resistance: Maximum of 100 m max. 7. Humidity Insulation resistance: . Minimum of 50 M min. 96 hours at 40C and humidity of 90 to 95% (steady state) No damage, cracks, or parts dislocation. Contact resistance: Maximum of 100 m max. Temperature: -55 +15 to +35 +85 +15 to +35C 8. Temperature Insulation resistance: Minimum of 50 M min. Time: 30 2 to 3 30 2 to 3 minutes cycle No damage, cracks, or parts dislocation. 5 cycles 9. Resistance to No deformation of components affecting 1) Reflow: peak temperature 250C max, 60 seconds max at above 230C. soldering heat performance. 2) Manual soldering: 350 10 for 5 seconds. Note 1: When energizing rated current to all contacts, use 70% of rated current. Note 2: Includes temperature rise caused by current flow. Note 3: The termstorag here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage. Materials Parts Materials Color/Finish Remarks LCP Beige UL94V-0 FH29B Series : Deep brown Insulator PA FH29BW Series: Light brown UL94HB PPS FH29BJ, FH29DJ Series: Black UL94V-0 ----------- Contacts Phosphor bronze Gold plated Product Number Structure Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. ( ) FH 29 B W - 80S - 0.2 SHW 05 1 2 3 4 5 6 7 8 1 Series name : FH 5 No. of contacts: 22 to 120 2 Series No. : 29 6 Contact pitch: 0.2 mm 3 B: Standard type D: With metal fitting type 7 Terminal type Blank: Standard SHW: SMT double-sided lead horizontal mount type 4 W: Halogen-free (flame retardance UL94HB) 8 Plating specifications J: Halogen-free (flame retardance UL94V-0) (05) Gold plating with nickel barrier, 5,000 pieces per reel (99) Gold plating with nickel barrier, 500 pieces per reel 2 Jun.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.