0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors
FH52 Series
Secure actuator retention
Metal fittings are designed to hold and
stabilize the actuator
Contacts are designed to hold and
stabilize the actuator
Features
Extended metal fitting option (FH52E/FH52K/FH52T)
1. Highl y reliable connection and robust structure
With the need for higher contact counts and the need for
a connector body that delivers unquestionable strength
and a reliable connection in a FPC/FFC connector, the
FH52 series has made great strides to meet this need. It
meets this need with the following:
-An FPC positioning mechanism that delivers the high
reliability requested
-A reliable and secure connection that is packed into a
well-designed, durable structure.
2. Product variations capable of meeting a range of needs
FH52E : Long metal fittings type
Easy visual inspection of solder posts after processing.
The metal fittings extend out from the connector body to
FH52K : Long metal fittings type, 125 Heat Resistant Type
enable a visual inspection of its soldering conditions.
12 5 heat resistant connector meets severe automotive requirements
FH52T : Long metal fittings type, 2-Point Contact Type
Contact structure with independent springs connects with
22-P-Points of Contact (FH52T)oints of Contact (FH52T)
FPC/FCC at 2 points reducing failure from dust intrusion.
3. Simplified operations
The flip lock structure makes it easier to engage/
disengage the actuator and reduces the required force
needed to operate. A clear tactile click is delivered upon
the successful completion of the mating process.
4. Increased retention force
The side catch technology combined with tabbed FPC/FFC
increase the horizontal retention force of the FPC/FFC.
5. Accepts standard 0.3mm thick FPC/FFC
It accepts 0.3mm thick products that are easy to
2-point contact structure with independent springs to
manufacture and have superb insertion performance.
improve reliability.
6. Fully molded structure aids PCB layout
The bottom of this connector is enclosed by a fully
molded structure that protects the contacts and removes
Side catch technology designed to place a temporSide catch technology designed to place a temporarary y
any restrictions from PCB patterning and design.
hhold on the FPC/FFC befold on the FPC/FFC before the locore the lock is engaged.k is engaged.
7. Halogen-free
All materials and substances used to produce this
product comply with Halogen-free standards.* As
defined in IEC 61249-2-21. Br : 900 ppm or less, Cl : 900
ppm or less, Br+Cl : 1,500 ppm or less
8. Supports automatic pick-n-place mounting
Offered in tape and reel packaging that is compatible with
automatic machine mounting. (3,000pcs/reel)
9. Multiple packing options
The standard packaging is 3,000pcs/reel, but it is also
FPC/FFC with tab increase the
offered in a 500pcs/reel. (The outer diameter of the reel
retention force in horizontal direction.
will be 180mm in this case.)
2016.5w 1
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.FH52 Series0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors
Product Specifications
Operating temperature range : -40 to +105C (Note 2)(Note 4) Storage temperature range : -10 to +50C (Note 3)
Rated current 0.5A (Note 1)
Rating Operating humidity range : Relative humidity 90% max. Storage humidity range : Relative humidity 90% max.
Rated voltage 50V AC rms
(No condensation) (No condensation)
Adaptive FPC/FFC
Thickness: = 0.3 0.05mm Gold plated contact traces
contact specifications
Item Specification Conditions
1. Insulation resistance 500M min. 100V DC
2. Withstanding voltage No flashover or insulation breakdown 150V AC rms / 1 minute
3. Contact 50m max.
1mA (DC or 1000Hz)
resistance * Including FPC/FFC conductor resistance
4. Durability Contact resistance : 50m max.
20 cycles
(insertion / withdrawal) No damage, cracks, or parts dislocation
No electrical discontinuity of 1s or more
Frequency : 10 to 55Hz, single amplitude of 0.75mm,
5. Vibration Contact resistance : 50m max.
10 cycles in each of the 3 directions
No damage, cracks, or parts dislocation
No electrical discontinuity of 1s or more
2
Acceleration of 981m/s , duration of 6 ms, sine half-wave
6. Shock Contact resistance : 50m max.
waveform, 3 cycles in each of the 3 axes
No damage, cracks, or parts dislocation
Contact resistance : 50m max.
7. Humidity 96 hours at temperature of 40 and humidity of 90% to
Insulation resistance : 50M min.
(Steady state) 95%
No damage, cracks, or parts dislocation
Contact resistance : 50m max. Temperature : -40C / +15 to +35 / +105(Note 4) / +15 to +35
8. Temperature
Insulation resistance : 50M min. Time : 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
cycle
No damage, cracks, or parts dislocation 5 cycles
9. Resistance to No deformation of components affecting Reflow : Peak temperature 250C max., 230C or more, 30 seconds or less
soldering heat performance Manual soldering: 350 10C for 5 seconds
Note 1 : When passing the current through all of the contacts, use 70% of the current rating.
Note 2 : Includes temperature rise caused by current flow.
Note 3 : The term storage refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity Range covers non-conducting condition of installed connectors in storage, shipment or during transportation.
Note 4 : FH52K withstands up to +125C.
Materials / Finish
Part Material Finish Remarks
Color : Grey
Insulator LCP UL94V-0
Color : Black
Contacts Copper alloy Partially gold plated
Metal fittings Brass Tine plated
Product Number Structure
Refer to the chart below when datermining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
( ) ( )
FH 52 E 50 25 S B 0.5 SH 99
we r t y u i o !0
q Series name : FH y Contact arrangement : Single (pole piece array)
w Series No. : 52
u Alternating direction :
No symbol : Standard type (all contacts loaded)
e Blank : Standard type
A : Alternating contact type (Alternating on the polarity side)
E : Long metal fittings type
B : Alternating contact type (Alternating on the opposite polarity side)
K : Long metal fittings type, +125C Heat Resistant type
T : Long metal fittings type, 2-Point Contact type
i Contact pitch : 0.5mm, 1mm
r Standard type : Number of contacts o Termination type
Alternating contact type : Mold size SH : SMT horizontal mounting type
t Standard type : No symbol ! 00 SpecificationBlank : Partially gold plated, 3,000pcs/reel
(99) : Partially gold plated, 500pcs/reel
Alternating contact type : Number of contacts
2
Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.