0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding FX12 Series Dual Shields (when mated) Patented Design =ZVYZh YZ h ZaY GZXZeiVXah YZ h ZaY BZiVa ii c h Fig.1 Features Effective Shielding 1. Dual shields Built-in shield plates and metal fittings in the plugs and receptacles prevent electromagnetic emission and external interference on the entire 360 periphery of mated connectors. (Fig.1, 2) 2. Low-Profile A board-to-board distance of 1.5mm combined Without shield plates with reduced mounting areas allow for use in With shield plates space-limited applications. (Fig.3) Frequency (GHz) 3. Self alignment Built-in self-alignment feature in the plug and Fig.2 receptacle allows mating / un-mating in limited spaces. (Fig.4) Low-Profile, Space-Saving with Reduced Connector Footprint 4. Consistent mated retention force (Shown 24-Position fully mated) Indents in the shield plates and contact configuration assure consistent, mated retention forces regardless of the number of contacts. A positive, tactileclic confirms the fully mated state. 5. Solder wicking prevention Nickel plating barrier on the contacts prevents solder compound intrusion (wicking) into the contact engagement areas. 6. High contact reliability The narrow female contacts have a curved shape Fig.3 that acts like a spring, producing a long wipe length during mating and results in high contact reliability. Self Alignment of 0.3 mm 7. Pick-and-Place automatic mounting friendly Receptacle The compact, double shielded structure still provides enough area for vacuum pick-up machines when used in automated mounting methods. Receptacle: 0.8mm Header: 0.8mm 8. RoHS Compliant All materials and substances used to produce this product comply with RoHS standards. Plug Fig.4 1 2015.8e Jun.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Emitted Noise Level (dBm) FX12 Series0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding Product Specifications Storage temperature range Current rating 0.3A Operating temperature range -10 to +60 (Note 2) Rating Voltage rating 30V AC -55 to +85 (Note 1) Storage humidity range Relative humidity 95% max. (No condensation) Item Specification Conditions 1.Insulation resistance 50M min. 100V DC 2.Withstanding voltage No flashover or insulation breakdown. 100V AC/one minute 3.Contact resistance 100m max. 100mA No electrical discontinuity of 1s or more. Frequency: 10 to 55 Hz, single amplitude of 4.Vibration resistance No damage, cracks or parts dislocation. 0.75mm, 3 axis, 10 cycles 2 Acceleration of 490m/s , 11ms duration, No electrical discontinuity of 1s or more. 5.Shock resistance sine half-wave waveform, 3 cycles / each of No damage, cracks or parts dislocation. 3 axis directions Contact resistance: 120m max. 6.Humidity resistance Insulation resistance: 25M min. 96 hours at 40, 90% to 95% R.H. No damage, cracks or parts dislocation. Temperature: -55 +15 to 35 Contact resistance: 120m max. +85 +15 to +35 7.Temperature cycle Insulation resistance: 50M min. Time: 30 2 to 3 30 2 to 3 (Minutes) No damage, cracks or parts dislocation. 5 cycles Contact resistance: 120m max. 8. Mating Cycles 30 cycles No damage, cracks or parts dislocation. 9. Resistance to No deformation of components affecting Reflow: At the recommended temperature profile soldering heat performance. Manual soldering: 360 for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note 2 : The term storage refers to products stored for long periods of time prior to mounting and use. Operating temperature range and humidity range includes non-conducting condition of installed connectors in storage, shipment or during transportation. Materials / Finish Part Material Finish Remarks Insulator Polyamide Color: Black UL94V-0 Header Engagement Area: Gold Plated of 0.1m Contacts ------- Receptacle Termination Area: Flash Plated Phosphor bronze Ground plates Flash plated ------- Metal fittings Tin plated ------- Product Number Structure FX12 B - 24 P - 0.4 SV (**) qw er ty u Series name : FX12 Connector type q r w Configuration P : Header B : Without guide post S : Receptacle e Number of contacts : 24, 40, 60 t Contact pitch : 0.4 mm y Mounting style SV : SMT Blank : Embossed tape packing (3,000 pcs/reel) u ( 30 ) : Embossed tape packing (100 pcs/reel) 2 Jun.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.