Stacking Height 5 to 11mm Half Pitch Connector FX4 Series Stacking Height Flexible 5 to 11mm DIP type The mounting area 70% reduced, compared with conventional product (FX2 series) FX2 series FX4 series (Compared with 60 contacts) Features The FX4 series is a miniature board to board connectors, where the stacking height can be set at the 1mm interval. Through hole Type 1. Small and Light The mounting space and weight is reduced about 30%, compared to the conventional product (HRS FX2 series), respectively, and the mounting area about 70% reduced, compared to the conventional one. 2. Stacking Height 5 to 11mm The board to board stacking height can be set per 1mm from 5mm up to 11mm. 3. Flux Swell Prevention When solder is dipped, the flux swell from the board rear side is completely prevented. 4. Mis-insertion Prevention and Low Insertion/Extraction Force Mechanism The connection area is designed to completely prevent the mis-insertion. Moreover, the low insertion/extraction mechanism is adopted. Applications Computers, peripheral equipments, business equipments, etc. A119FX4 SeriesStacking Height 5 to 11mm Half Pitch Connector Product Specifications Current rating 0.5A Operating Temperature Range -55 to +85 (Note 1) Storage Temperature Range -10 to +60 (Note 2) Rating Voltage rating 125V AC Operating Humidity Range 40% to 80% Storage Humidity Range 40% to 70% Item Specification Condition 1. Insulation Resistance 100M ohms min. Measured at 250V PC 2. Withstanding Voltage No flashover or insulation breakdown. 300V AC for 1 minute 3. Resistance 45m ohms max. 100mA 4. Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95% 6. Temperature Cycle Contact resistance : 55m ohms max. (-55: 30 minutes 15 to 35: 2 to 3 minutes Insulation resistance : 100M ohms min. (-85: 30 minutes 15 to 35: 2 to 3minutes) 5 cycles 7. Durability (Mating/un-mating) Contact resistance : 55m ohms max. 300 cycles 8. Resistance to Soldering heat No deformation of components affecting performance. Solder bath: 260 for 10 seconds Manual soldering: 360 for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The termstorag refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Part Material Finish Remarks Insulator Polyamide Beige UL94V-0 Receptacle Contact Selective gold plated Phosphor bronze Header Contact Selective gold plated Note : The black dots on the insulater will not affect performance. Ordering Information Dip Type FX4C 1 - 80 P - 1.27 DSA L qw er ty u q Series Name : FX4C r Connector Type P : Header w Product Height Variable:None: Standard 1: +1mm S : Receptacle 2: +2mm 3: +3mm t Contact Pitch : 1.27mm e Number of Contacts: 20, 32, 40, 52, 60, 68, 80 y Contact type DSA : Straight u L: Board prefixed pin BApplication Pattern and Stacking Height Combination Through hole Type Unit: mm Receptacle FX4C -*S FX4C2-*S FX4C3-*S (Catalog page A124) (Catalog page A125) (Catalog page A126) Header FX4C -*P 578 (Catalog page A121) FX4C1-*P 689 (Catalog page A122) FX4C3-*P 810 11 (Catalog page A123) A120