Model 13 Subminiature Load Cell DESCRIPTION frequency response and low deflection to achieve a combined Model 13 (compression only) subminiature load cell is designed non-linearity and hysteresis of 0.25 % to 0.5 % full scale. A to measure load ranges from 150 g to 1000 lb. With subminiature balance module is included in the load cells lead wire cable for dimensions, including diameters from 0.38 in to 0.75 in and temperature compensation and should not be removed. heights of 0.13 in to 0.25 in, these units are easily incorporated into systems having limited space. Model 13 combines high FEATURES 150 g to 1000 lb 0.7 % accuracy mV/V output Subminiature design Single diaphragm constructionModel 13 PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range codes Range 6 Load ranges 150 g, 250 g, 500 g, 1000 g, 5 lb, 150 g AL 10 lb, 25 lb, 50 lb, 100 lb, 250 lb, 500 lb, 250 g AN 1000 lb 500 g AP Linearity 0.5 % full scale 1000 g AR Hysteresis 0.5 % full scale 5 lb Non-repeatability 0.1 % full scale AT Tolerance on output 10 lb AV 15 mV/V (nominal) 150 g to 500 g 25 lb BL Tolerance on output 1000 g 1.5 mV/V (nominal) 50 lb BN Tolerance on output 2 mV/V (nominal) 100 lb 5 lb to 1000 lb BR Operation Compression only 250 lb CN Resolution Infinite 500 lb CR 1000 lb CV ENVIRONMENTAL SPECIFICATIONS Characteristic Measure WIRING CODES Temperature, operating -54 C to 121 C -65 F to 250 F Cable Unamplified Temperature, compensated 15 C to 71 C 60 F to 160 F Red (+) excitation Temperature effect, zero 0.01 % full scale/F Black (-) excitation Temperature effect, span 0.02 % reading/F Green (-) output White (+) output ELECTRICAL SPECIFICATIONS DEFLECTIONS AND RINGING FREQUENCIES Characteristic Measure Capac- Deflec - Weight Weight with Max. al- Strain gage type Semiconductor ity (lb) tion at cable lowable 150 g to 500 g 1 full scale load (% Strain gage type Bonded foil -3 (10 in) FS) 1000 g to 1000 lb 150 g 0.06 1 g 0.002 lb 9 g 0.019 lb 500 Excitation (calibration) 5 Vdc 250 g 0.06 1 g 0.002 lb 9 g 0.019 lb 500 Insulation resistance 5000 mOhm 50 Vdc 500 g 0.08 1 g 0.002 lb 9 g 0.019 lb 500 Bridge resistance (toler- 500 ohm (nominal) 1000 g 0.05 1 g 0.002 lb 9 g 0.019 lb 150 ance)150 g to 500 g Bridge resistance (toler- 350 ohm (nominal) 5 lb 0.5 1 g 0.002 lb 9 g 0.019 lb 150 ance)1000 g to 1000 lb 10 lb 0.4 1 g 0.002 lb 9 g 0.019 lb 150 Zero balance (tolerance) 3 % of full scale (nominal) 25 lb 0.4 1 g 0.002 lb 9 g 0.019 lb 150 Shunt calibration data Included 50 lb 0.4 1 g 0.002 lb 9 g 0.019 lb 150 Electrical termination (std) 1,83 m 5 ft integral cable with balance 100 lb 0.4 3 g 0.006 lb 11 g 0.024 lb 150 3 board 250 lb 0.5 3 g 0.006 lb 11 g 0.024 lb 150 500 lb 0.5 10 g 0.022 lb 18 g 0.039 lb 150 MECHANICAL SPECIFICATIONS 1000 lb 0.6 10 g 0.022 lb 18 g 0.039 lb 150 Characteristic Measure Maximum allowable load See table Weight See table Material Stainless steel Deflection full scale See table 2 Honeywell Sensing and Control