Wing Union/Hammer Union Pressure Sensors Models 435/437 0 psi to 5000 psi 0 psi to 6000 psi 0 psi to 10000 psi 0 psi to 15000 psi 0 psi to 20000 psi 0 bar to 350 bar 0 bar to 400 bar 0 bar to 700 bar 0 bar to 1000 bar 0 bar to 1350 bar DatasheetWing Union/Hammer Union Pressure Sensors Models 435/437 Honeywells Models 435/437 Wing Union/Hammer Union Pressure Sensors are rugged devices designed for use with Weco 1502 fittings for both offshore and land-based oil and gas applications. Available in two accuracy levels (0.1 %FSS BFSL or 0.2 %FSS BFSL), Models 435/437 are typically used in demanding applications such as well stimulation and circulation systems. The higher accuracy option (available on Model 435 only) at 0.1 % full scale provides more confidence in the actual measured pressure value, particularly for smaller changes in pressure, allowing drilling operation adjustments as needed. Models 435/437 are constructed as an all-welded, stainless steel assembly with the sensor diaphragm and wing union fitting machined as one part. This helps provide hermetic integrity, which reduces the chance of media leakage vs. multi- piece parts, and increases reliability. The isolated pressure sensing diaphragm minimizes zero-shift during hammer up and eliminates long-term signal drift in the field. The Weco 1502 (50,8 mm 2 in ) Wing Union-compatible fittings are machined of Inconel X-750, which provides additional durability with highly abrasive and corrosive media, while the Honeywell proprietary stainless steel electrical connection provides enhanced secondary pressure containment. Each sensor undergoes special assembly processes to survive high shock and vibration for more reliable performance in the field. Features Potential Applications High accuracy 0.1 %FSS BFSL (Model 435) standard Acidizing accuracy 0.2 %FSS BFSL (Models 435/437) (see Table 1) Choke manifold All-welded one-piece, hermetically sealed, stainless-steel Fracturing and cementing construction Mud pumps / mud logging Standard aperture (Model 435) and wide aperture (Model 437) New well development and extraction pressure ports available to support media blends with high Oil and gas drilling viscosities Service and cement trucks Inconel X-750 wetted parts provide additional durability with Standpipe abrasive or corrosive media Stimulation Multiple electrical connectors supported Well head measurement High accuracy shunt calibration option allows users the ability to validate the offset signal in the field, ensuring the sensor is actively plugged into the system one-wire and two-wire options available (see Table 3 for additional information) Protective cage option provides extra electrical connection protection and increases durability RFI/EMI protected Intrinsically safe: FM /ATEX/IEC Ex certification C US CE approved Model 435 Model 435 Model 437 Model 437 with protective cage with protective cage ACCURATE DURABLE CONFIGURABLE sensing.honeywell.com 2