Manual Switches AML24 Series
Electronic Control Rocker
INCANDESCENT OR NON-LIGHTED DISPLAY
FEATURES
Electrical Data page 19
1 Silver or gold contacts.
Rockers page 51
1 2 or 3 position operation.
Lamps page 58
1 UL recognized, CSA certified.
Accessories pages 56, 57
1 Lamps can be furnished installed or
Mounting Dimensions pages 59, 62
ordered separately.
1 Lamp circuit independent of switch
*
*
circuit.
Rocker operators ordered separately. *AML24 Series: 1 pole and
2-pole only.
AML24 ORDER GUIDE
AML24 E B A 2 AA 01
Housing Bezel Incandescent Terminal Circuitry Operating
Type Color Lamp Type Type Codes Action
AML24 E B A 2 Insert Code Insert Code numbers
Rectangular Black No Lamp .110 .020 letters as from Operating
Non-Lighted Installed (Solder or shown in Action Chart
Quick-Connect) Circuitry Chart
AML24 F B
Rectangular 6 V Lamp* 3
1 Lamp Ckt. (A) .025 .025
C (Printed Ckt.,
AML24 G 14 V Lamp* or Push-on)
Rectangular
2 Lamp Ckts. E
28 V Lamp*
* Lamps will be installed per each lamp circuit specified in the Housing Type.
Example: AML24EBA2AA01
Rectangular non-lighted rocker switch
housing; black bezel; .110 .020 termi-
nals; with one circuit ON and one circuit
1 The MICRO SWITCH
OFF in each extreme operator position
identification is shown
on this side of the (maintained).
switch housings.
CIRCUITRY OPERATING ACTION
Silver Gold 2-Position 3-Position
Contacts Contacts
2-Position:
AA BA
01
Maint. None Maint.
02
AC BC
Mom. None Maint.
03
(Non-illuminated
Maint. None Mom.
switches only)
3-Position:
CA DA
04
Maint. Maint. Maint.
05
Mom. Maint. Mom.
CC DC
06
Maint. Maint. Mom.
07
(Non-illuminated
Mom. Maint. Maint.
switches only)
30 Honeywell1 Sensing and Control1 1-800-537-6945 USA1 F1-815-235-6847 International 1 1-800-737-3360 CanadaManuals
Manual Switches AML26 Series
Electronic Control Rocker
LED DISPLAY FEATURES
Electrical Data page 19
1 Identical to AML24, except furnished
Rockers page 52
with one or two rectangular high
Lamps and LEDs page 58
efficiency LEDs which give flush
Accessories page 57
display area and wide angle
Mounting Dimensions pages 59, 62
indication.
1 Available with or without diode 1 5 thru 24 VDC LED devices have
internal resistor to maintain current at
protection for LEDs.
nominal 20 mA.
1 LED circuit independent of switch
1 UL recognized, CSA certified.
circuit.
Rocker operators ordered separately.
*
*
LEDs are not replaceable.
*AML26 Series: 1 pole and
2-pole only.
AML26 ORDER GUIDE
AML26 F B B 2 AA 01 R X
Housing LED Terminal Type/ Circuitry Operating LED Color LED Color
Type Bezel Color Voltage Diode Protection Codes Action (LED A) (LED B)
AML26 F B B 2 Insert code Insert code RR
1 LED Black V* .110 .020 letters numbers Red Red
(Solder or as shown in from YY
AML26 G C Quick-Connect Circuitry Operating Yellow Yellow
2 LEDs 5 V Chart Action GG
3 Chart Green Green
D .025 .025 XX
10 V (Printed Ckt., LED version No LED No LED
or Push-On) available
E only with
15 V 8 AA
.110 .020 BA
F w/Diode CA
24 V for LED DA
protection circuitry
*See LED application information for devices without current-limiting resistor, page 58.
Example: AML26FBB2AA01RX
Rectangular rocker switch; illuminated
with one LED, this device has a black
bezel, .110 .020 terminals; with one
circuit ON and one circuit OFF in each
extreme operator position (maintained).
Rocker
ordered
separately
1 The MICRO SWITCH identification is
shown on this side of the switch housings.
Honeywell1 Sensing and Control1 1-800-537-6945 USA1 F1-815-235-6847 International 1 1-800-737-3360 Canada 31